Westec 760 Basics

Do not power down this system. Use the sleep switch in the panel.

Downloadable No
Panic Buttons Police Panic – Button in between and below the numbers and speakers on the keypad
Arm Arm Code (must have green ready light)
Disarm Disarm Code
Cancel Alarm Disarm Code
Silence Disarm Code / use Key Switch
System Off Turn Key Switch to “SERVICE” postion
Test Push “TEST” button on control panel for 5 seconds
light on
Button on the control panel Labeled “TROUBLE SILENCE BUTTON”
Reset Smoke Open door on control panel move slider switch to the left, move the switch back to the right, if this does
not reset smoke set for service
Lights on Keypad

Arm/Loop light
Green On – when system is ready to be armed
Off – if zone is open
Flashing green to red, green to red – exit/entry delay warning
Red – system is armed
Pwr/Trouble light –
Green On – normal
Off/pulsing beep – system in is fault (turn key switch to TROUBLE/SILENCE) set for service
Yellow – Armed Interior