Westec 7000 Codes

General Info – PC4000/PC4010 use 4-digit codes, PC4020 can use 4 or 6-digit codes
Grand Master Code – Code 001, can change Master, Supervisory or User Codes
Master Codes – Can change Supervisor or User Codes
Supervisor Code – Can change User Codes within its partition only

After pressing * 5 keypad will show various options
0 = Program Code
1 = Erase Code
2 = Edit Access Code Name (program names/ascii and lower case like PC5010)
3 = Edit Access Code Options (Use < > to scroll options
4 = Edit Partition Mask
5 = Exit this menu
Press # to exit
Adding/Changing Codes – (Single Partition)
1. Press * 5 + Grand Master/Master/Supervisor Code
2. Keypad displays Sel Code < >, use < > to move to codes 001 to 128, press * to edit code
3. Keypad will show menu Press 0, keypad will show current code in that location
4. Enter new 4-digit code
Note: if user wants to keep that code press # to exit
Delete Codes – (Single Partition)
1. Press * 5 + Grand Master/Master/Supervisor Code
2. Keypad displays Sel Code < >, use < > to move to codes 001 to 128, press * to edit code
3. Keypad will show menu Press 1
4. Press # to exit
Note: Erasing code will not erase User Name assigned to that code