Westec 7000 Basics
| This panel can lose power without losing Programming | |
| Batteries | System 12 volt rechargeable Gel-Cell inside main panel |
| Downloadable | No |
| Panic Buttons | Police, Fire and Medical (Located in the top left of keypad) (Press and hold for 2 seconds) |
| Arm Away | Enter access code and leave through an exit door or press AWAY for 2 seconds |
| Arm Stay | Enter access code or press HOME for 2 seconds |
| Quick-Arm | * 0 to Arm system (If Enabled) |
| Instant Arm | * 9 before access code or AWAY/HOME |
| Disarm | Enter access code (Press # if any mistake is made) |
| Silence | Alarm Enter access code (Press # if any mistake is made) |
| View Troubles | * 2 |
| Bypass |
1. Press * 1 2. Press Zone to bypass (01 to 32) (Zone light should turn ON) 3. Press # to exit (If this does not work try * 1 + Master Code + (01 to 32) + # ) |
| Reset Smoke | Enter access code (Press # if any mistake is made) |
| Door Chime | Hold CHIME key for 2 seconds or * 4 to enable/disable |
| Alarm Memory | * 3 to view last alarm |
| Event Buffer | Access code + 9 (Then scroll) |
| Auto Arm | * 6 + Master Code + 2 (3 beeps=Enable, 1 long beep=Disable) |
| Auto Arm Time | * 6 + Master Code + 3 + HHMM (Military Time) |
| Change Settings |
* 6 + Access/Master + 3 Use Arrow keys to scroll through settings and * to select setting you want. |
| Change Time/Date |
1. Access code + 9 2. Scroll to “Set System Time” with the (< >) Arrow keys and press * 3. Enter Current time in 24 hour format (HH:MM) 4. Use Arrow keys to scroll to “Set System Date” and press * 5. Enter Current Date (MMDDYY) 6. Press # # |
| Enable DLS | Access code + 9 (Then scroll) |
| Background Music | * 6 + Access/Master + 4 |