General Info |
– PC4000/PC4010 use 4-digit codes, PC4020 can use 4 or 6-digit codes |
Grand Master Code |
– Code 001, can change Master, Supervisory or User Codes |
Master Codes |
– Can change Supervisor or User Codes |
Supervisor Code |
– Can change User Codes within its partition only |
|
After pressing * 5 keypad will show various options |
|
0 = Program Code |
|
1 = Erase Code |
|
2 = Edit Access Code Name (program names/ascii and lower case like PC5010) |
|
3 = Edit Access Code Options (Use < > to scroll options |
|
4 = Edit Partition Mask |
|
5 = Exit this menu |
|
Press # to exit |
Add/Change Codes |
– (Single Partition) |
|
1. Press * 5 + Grand Master/Master/Supervisor Code |
|
2. Keypad displays Sel Code < >, use < > to move to codes 001 to 128, press * to edit code |
|
3. Keypad will show menu Press 0, keypad will show current code in that location |
|
4. Enter new 4-digit code |
|
Note: if user wants to keep that code press # to exit |
Delete Codes |
– (Single Partition) |
|
1. Press * 5 + Grand Master/Master/Supervisor Code |
|
2. Keypad displays Sel Code < >, use < > to move to codes 001 to 128, press * to edit code |
|
3. Keypad will show menu Press 1 |
|
4. Press # to exit |
|
Note: Erasing code will not erase User Name assigned to that code |