Westec 5000 Basics
Panel does not lose memory when power is lost
Panic Buttons |
|
||||||
Power Down | The easiest way is the On/Off switch on the board (See Wiring) | ||||||
Downloadable | No | ||||||
Disarm | USER CODE + ENTR + OFF + ENTR (ON, INT A, INT B will turn off) | ||||||
Arm Perimeter | USER CODE + ENTR + HOME + ENTR (ON light will turn on) | ||||||
Quick-Arm Perimeter |
Press HOME (2 beeps) + ENTR | ||||||
Arm All | USER CODE + ENTR + ALL + ENTR (ON, INT A, INT B lights will turn on) | ||||||
Quick-Arm All | Press ALL (2 beeps) + ENTR | ||||||
Arm Interior A | USER CODE + ENTR + INT A + ENTR (INT A light will turn on) | ||||||
Quick-Arm Int A | Press HOME (2 beeps) + ENTR | ||||||
Arm Interior B | USER CODE + ENTR + INT B + ENTR (INT B light will turn on) | ||||||
Quick-Arm Int B | Press INT B (2 beeps) + ENTR | ||||||
Instant Enable/Disable |
USER CODE + ENTR + INST + ENTR now arm system (INST light will turn on) turning system off disable feature | ||||||
Quick Instant | Press INST B (2 beeps) + ENTR | ||||||
Bypass & Arm Perimeter |
USER CODE + ENTR + HOME OR ALL + BYPS + ENTR (this will bypass and arm with system off) | ||||||
Bypass & Arm Perimeter |
USER CODE + ENTR + BYPS + ZONE # + ENTR (this will bypass and arm with system on) | ||||||
Chimes | USER CODE + ENTR + CHIME + ENTR (CHIME light will turn arm) | ||||||
Quick Chimes | Press CHIME (2 beeps) + ENTR | ||||||
Clear Last Entry |
CLR | ||||||
Clear Trouble | CLR for 2 beeps | ||||||
Reset Alarm | USER CODE + ENTR | ||||||
Reset Fire | USER CODE + ENTR + OFF + ENTR + OFF + ENTR | ||||||
Test | USER CODE + ENTR + TEST + ENTR (starts and stops test) | ||||||
User Codes | |||||||
Add Maid’s Code |
USER CODE + ENTR + 9 + NEW CODE (2 to 10 digits long) + ENTR | ||||||
Enable/Dis Maid’s Code |
USER CODE + ENTR + 9 + ENTR | ||||||
Change User Codes at the Command Menu (some panels may not be able to do this) | |||||||
USER CODE 1 |
on/off: Enter User Code + ENTR (keypad will say ENTER COMMAND, MENU) Press SELECT (keypad will say MAIN MENU) Press SCROLL DOWN to User Code PGMG Press SELECT (keypad will say USER CODE MENU, TURN CODE 1 ON) If SELECT is pushed User Code 1 will turn on Press SCROLL DOWN is pushed (keypad will say USER CODE MENU, TURN CODE 1 OFF) If SELECT is pushed User Code 1 will turn off |
||||||
USER CODE 1 |
on: Enter User Code + ENTR (keypad will say ENTER COMMAND, MENU) Press SELECT (keypad will say MAIN MENU) Press SCROLL DOWN to User Code PGMG Press SELECT (keypad will say USER CODE MENU, TURN CODE 1 ON) Press SCROLL DOWN (keypad will say USER CODE MENU, TURN CODE 1 OFF) Press SCROLL DOWN (keypad will say USER CODE MENU, CHANGE CODE 1) Press SELECT to change user code 1(keypad will say CODE:1, NEW:) Enter new code and press ENTR (#) The new code will show next to CODE:1 on the keypad Push Select |
||||||
USER CODE 2 |
ON/OFF: Enter User Code + ENTR (keypad will say ENTER COMMAND, MENU) Press SELECT (keypad will say MAIN MENU) Press SCROLL DOWN to User Code PGMG Press SCROLL DOWN (keypad will say USER CODE MENU, TURN CODE 1 ON) Press SCROLL DOWN (keypad will say USER CODE MENU, TURN CODE 1 OFF) Press SCROLL DOWN (keypad will say USER CODE MENU, CHANGE CODE 1) Press SCROLL DOWN (keypad will say USER CODE MENU, TURN CODE 2 ON) Press SCROLL DOWN (keypad will say USER CODE MENU, TURN CODE 2 OFF) Press SCROLL DOWN (keypad will say USER CODE MENU, CHANGE CODE 2) Press SELECT to change user code 2 (keypad will say CODE:2, NEW:) Enter new code and press ENTR (#) The new code will show next to CODE:2 on the keypad Push Select |
||||||
USER CODE 2 |
on/off (if already programmed): Enter User Code + ENTR (keypad will say ENTER COMMAND, MENU) Press SELECT (keypad will say MAIN MENU) Press SCROLL DOWN to User Code PGMG Press SCROLL DOWN (keypad will say USER CODE MENU, TURN CODE 1 ON) Press SCROLL DOWN (keypad will say USER CODE MENU, TURN CODE 1 OFF) Press SCROLL DOWN (keypad will say USER CODE MENU, CHANGE CODE 1) Press SCROLL DOWN (keypad will say USER CODE MENU, TURN CODE 2 ON) If SELECT is pushed User Code 2 will turn on Press SCROLL DOWN (keypad will say USER CODE MENU, TURN CODE 2 OFF) If SELECT is pushed User Code 2 will turn off |
||||||
Phone access | |||||||
Internal |
Within 5 seconds of picking up the inside phone press * * or # #. The voice system will say “HELLO”. Now enter the user code. If the wrong code is entered press CLR = * and reenter user code. The correct user code must be entered within 15 seconds. After entering the correct code the system will say “ENTER COMMAND” (use the following command below). System works as is you were at the keypad. |
||||||
External |
When the phone module answers it will say “HELLO”. Now enter the user code. If the wrong code is entered press CLR = * and reenter user code. The correct user code must be entered within 15 seconds. After entering the correct code the system will say “ENTER COMMAND” (use the following command below). System works as is you were at the keypad. |
||||||
Commands |
#’s on keypad and phone
1 HOME – arm the primeter zones |
||||||
Examples |
0 + 1 + # (ENTR) – Area Status 0 + 2 + # (ENTR) – Zone Status 0 + 3 + # (ENTR) – Alarm status 0 + 4 + 1-8 + # (ENTR) – List above to arm/disarm/bypass |