Visionic Powermax Program

Enter Program 1. Press NEXT seconds until INSTALLER MENU shows
2. Press SHOW/OK, at ENTER CODE enter 9999 (Display shows <OK> TO EXIT)
Go to Location Press NEXT to cycle through Menu displays, press SHOW/OK to enter that Menu
Program Location Enter Data then press SHOW/OK to save, it will move out of that location
Exit Location Press BACK to move up to Menu displays
Exit Program Press BACK until <OK> TO EXIT appears, press SHOW/OK
Default Panel Move Jumper on back of panel then power up system
Zone Page VIPMAX

Menu Selections Options Default
1. NEW INSTL CODE
New Instl Code

0000 to 9999

9999

2. ENTROLLING

3. DEFINE ZONES

4. DEFINE PANEL (Press SHOW/OK to enter, NEXT to cycle options and SHOW/OK to save)
Selections Options Default
01: Entry Delay 1 0 sec to 4 Min 30 Seconds
02: Entry Delay 2 0 Sec to 4 Min 15 Seconds
03: Exit Delay 30 Sec to 4 Min 60 Seconds
04: Bell Time (Timeout) 1 Min to 20 Min 4 Minutes
05: Abort Time (Dial Abort) 0 Sec to 4 Min 30 Seconds
06: Alarm Cancel Inactive to 15 Min 5 Minutes
07: Quick Arm ON/OFF OFF
08: Force Arm ON/OFF OFF
09: Restart Exit Delay ON/OFF ON
10: Piezo Beeps Enable/Away Only/Disable Enable
11: Trouble Beeps Enable/Off at Night/Disable Enable
12: Panic Alarm Enable/Disable Enable
13: Swinger Stop 1/2/3/No Shutdown 1 Alarm
14: Cross Zoning ON/OFF OFF
15: Supervision Time 1 Hour to 12 Hours 2 Hours
16: Aux Button Option Status/Instant/PGM X-10 Status
17: Jam Detect (Wireless) ON/OFF ON
18: Two Way Voice Enable/Disable Disable
19: PGM/X–10 Time (Pulse) 2 Sec to 20 Sec/Toggle 2 Seconds
20: Lockout Time 00:01 to 23:59 00:00
21: Latchkey ON/OFF OFF
22: No Active (No Activity Timer) 3 to 72 Hours/Disable Disable
23: Back Light ON/OFF after 10 Seconds OFF
Pressing NEXT cycles back to 01, press BACK to exit this section

5. DEFINE COMM. (Press SHOW/OK to enter, NEXT to cycle options and SHOW/OK to save)
Selections Options Default
01: Dial Method Tone/Pulse Tone
02: Line Test 1 to 30 Days/OFF OFF
03: 1st Control Phone Number Up to 15 Digits
A = # + 0 B = # + 1
C = # + 2 D = # + 3
E = # + 4   F = # + 5
04: 1st Account Number Up to 4 Digits
05: 2nd Control Phone Number Up to 15 Digits Not Used
(To scroll press BACK to move left, NEXT to move right, OFF erases everything after cursor)
06: 2nd Account Number Up to 4 Digits Not Used
07: Report Format Contact ID/SIA/4/2 1400/4/2 2300 SIA or Contact ID will work
08: 4/2 Pulse Rate 10/20/30/40PPS 40PPS
09: Report > Cntr All * Backup
All -O/C * Backup
All * All
All -O/C * All -O/C
All -O/C * O/C
All
Alrm * all
Disable
(All events to Phone 1, Backup Phone 2)
(All but O/C to Phone 1, Backup Phone 2)
(All events to Phone 1 and Phone 2)
(All but O/C to Phone 1 and Phone 2)
(All but O/C to Phone 1, O/C to Phone 2)
(-alrt) * alrt (All but Alerts Phone 1, Alerts Phone 2)
(-alrm) (Alarms Phone 1, All but Alarms Phone 2)
(Nothing sent to either Phone)
10: Dial Attempts 2/4/8/12/16 (8 Attempts)
11: 1st Privt Tel# Up to 16 digits (Gives voice alarms)
12: 2nd Privt Tel# Up to 16 digits
13: 3rd Privt Tel# Up to 16 digits
14: Prvt Msg Type Tone/Voice (Voice)
15: Prvt Attempts 1/2/3/4 4 Attempts
16: Report > Prvt All
Alarms + Alerts
Alarms + OP/CL
Alarms
Alerts
OP/CL
Disable Report
(All Alarms to Private Phone)
(Alarms + Alerts to Private Phone)
(Alarms + OP/CL to Private Phone)
(Alarms Only)
(Alerts Only)
(Openings/Closings Only)
(Send nothing to Private Phone)
17: Tel Acknowledge Single ACK/All Ack (Single Ack)
18: Pager Tel# Up to 16 Digits
19: Pager Pin # Up to 16 Digits
20: Report > Pager All
Alarms + Alerts
All (-OP/CL)
Trbl + OP/CL
Trbl
OP/CL
Disable Report
(All Alarms to Pager)
(Alarms + Alerts)
(All but Openings/Closings)
(Troubles + Openings/Closings)
(Troubles Only)
(Openings/Closings Only)
(Send nothing to Pager)
21: Recent Close ON/OFF OFF
22: Remote Access (Download) ON/OFF OFF (Turn it ON)
23: Download Code (Access Code) Up to 4 Digits 0000 (Leave Default)

6. DEFINE OUTPUTS
Define PGM

Define X-10

7. RECORD SPEECH
House Identity

User Term #1

8. DIAGNOSTICS

9. USER SETTINGS
Program 4th Follow Me Telephone Up to 16 Digits
Set System Clock
Set Date
Program User Codes
Select Voice Option