Videofied XT-IP160 Codes

Capactity 19 badges and access codes, including the installer code.
Duress 1 digit higher for Silent Duress Ex: 1234 = 1235
2 digit higher for Audible Duress Ex: 1234 = 1236
Access Levels Level 1 – Stand by level
Level 2 – Restricted User Arm/Disarm Only
Level 3 – Arm/Disarm, Event Log, Test Devices, Can create Level 2 and 3 codes
Level 4 – Installer Level, Approval of a Level 2 or 3 code is required before you can access Level 4
Installer Level 4 can create the FIRST Level 3 code only.
Adding Codes Right arrow —-> to Access Level 1, select [Yes/Ok] Arrow to Access Level 3 and select [Yes/Ok]
Enter Level 3 code then select [Yes/Ok] Display will say Access Level 3, left or right arrow to Badges/Access codes

select [Yes/Ok], Display will say "Enter a Badge / Code, select [Yes/Ok], enter a 4 to 6 digit number

Then select "Yes/Ok" re-enter code to confirm and select [Yes/Ok] again, enter a code name (required).

After name is entered select [Yes/Ok] Display will say "Name" Entry Complete. [Esc/No] unitl your back at Disarmed Level ?
Changing Codes Cannot change codes at the keypad, must be done remotely. You can delete the code and re-add it in.
Changing Code Levels/Name Right arrow —-> to Access Level 1, select [Yes/Ok] Arrow to Access Level 3 and select [Yes/Ok] Enter Level 3 code then select [Yes/Ok] Display will say Access Level 3, left or right arrow to Badges/Access codes
select [Yes/Ok], arrow over to Badges/Codes Configuration, select [Yes/Ok], Using the arrows find the code you are
changing. select [Yes/Ok], Display shows "Confirm the Code" enter the code, select [Yes/Ok] Modif Name, will change
the name for the code. Access Level ? will change the authority. Code Authorities are above under Access Levels.
Once done hit [Esc/No] unitl your back at Disarmed Level ?
Delete Code/Badge Right arrow —-> to Access Level 1, select [Yes/Ok] Arrow to Access Level 3 and select [Yes/Ok] Enter Level 3 code then select [Yes/Ok] Display will say Access Level 3, left or right arrow to Badges/Access codes
select [Yes/Ok] Arrow over to Deleting Badges/Codes, select [Yes/Ok] Arrow over to the code you wish to delete,
select [Yes/Ok] Keypad will say "Confirm the Code" Enter the code that is to be deleted
Display will say "Deleting Code (Name)" select [Yes/Ok] Display will say Code Deleted [Esc/No] until your back
at Disarmed Level ?