1. Home
  2. Skybell cameras
  3. Skybell ADC
  4. Skybell ADC
 

ADC Kwikset Door Lock

    Kwikset Deadbolt
    On 2Gig Equipment:

    1. Go to Services.
    2. Click on Z-wave.
    3. Click on the tool icon in the bottom left corner.
    4. Enter the Installer code.
    5. Click the Add Device Button.
    6. Take off the back case of the deadbolt.
    7. Press the white button depicted on the left of Diagram 1 for 3 seconds.
    8. Panel will show Device Enrolled.
    9. Customer can re-name the door lock, in the doorlocks section of the services button, or through the alarm.com customer portal.
    On GE Equipment:

    1. Enter System Programming.
    2. Go to Interactive Services.
    3. Go to Z-wave.
    4. Go to Enroll Device.
    5. Take off the back case of the deadbolt.
    6. Press the white button depiected on the left of Diagram 1 for 3 seconds.
    7. Panel will show Device Enrolled.
    8. Customer can re-name the door lock, in the door locks section of the services button, or through the alarm.com customer portal.
    9. The Door lock Name can be updated through the customer portal of Alarm.com.
Diagram 1: