Silent Knight 5204 Trouble
| 0 | Fire drill (with ALARM, ALARM MEMORY, or TROUBLE LED). |
| 1 through 4 |
Zone numbers (with ALARM, ALARM MEMORY, or TROUBLE LED). A “c” in front of the number indicates a supervisory sprinkler zone. |
| E7 | Indicates trouble with the EEPROM memory. |
| F0 | 5230 annunciator power trouble. |
| F1 | through F3 Indicates trouble with a particular annunciator. |
| A1 | through A2 Indicates trouble with a particular bell output. |
| P3 |
Indicates a short between Earth Ground and Common Ground. To determine the location of the short, remove field wiring circuits until the control returns to normal operation. |
| P4 |
Indicates a short between Earth Ground and loop or bell power. To determine the location of the short, remove field wiring circuits until the control returns to normal operation. |
| P0 | Indicates that the printer is out of paper. |
| dc | Low battery condition. |
| Ac | Low AC condition. |
| dF |
Dialer failed to communicate or Data lost during an attempt to transmit data to the central station. |
| L1 | Phone Line 1 Fault |
| L2 | Phone Line 2 Fault |
| -0 | Fire drill |
| -2 | Walk test |
| -4 | Downloading |
| -5 | Zone test |
| -6 | HEX PROGRAMMING mode |
| -7 | STEP PROGRAMMING mode |
| -8 | SET DATE mode |
| -9 | SET TIME mode |
|
2-, 3-, 4-, 5- 6-, 7-, 8-, 9- |
User must enter a code to perform the desired function with these prompts. |