Silent Knight 2721 Basics
For a blinking light: | |
Alarm memory (Clear by pressing SHUNT, TEST) Zone bypassed (clear by pressing SHUNT + Zone #) |
|
To silence trouble beeps: | |
Shunt and installer code | |
Interior/Door Chime button: | |
Interior light on = Interior protection on Press interior/door chime to turn chime on or off |
|
To change codes: | |
(Note, the 1st digit of the code is the user #, do not go higher than 7 for the 1st digit of the code) | |
SHUNT TEST Master or installer code (Trouble light should blink) Enter the new code followed by TEST (The first digit of the code will be the user #) Press TEST, TEST, TEST, TEST |
|
Low Battery: | |
The panel or keypad will make a click noise every minute. This panel checks the battery that often… also the lights will dim every minute & sends a low battery message |