GE / ITI / UC Concord Express Codes
| Master Code | 1 | |
| Secondary Codes | 15 (Users 01 to 15) | |
| Duress Code | (Can only be changed by Downloading or Service Tech) | |
|
|
||
| Installer or Dealer Code cannot be used to change lost Master Code, must be downloaded | ||
|
Quick way to Add Code |
1. Press 9 + Master Code | (“SYSTEM MENU” then “TIME/DATE”) |
| 2. Press 10 + User (01 to 15) + 0 | (Display shows “REG + User + – – – -) | |
| 3. Enter new User Code + # | (Display shows “REG + New Code) | |
| 4. Press * + 4 + # to exit | ||
|
Quick way to Delete Code |
1. Press 9 + Master Code | (“SYSTEM MENU” then “TIME/DATE”) |
| 2. Press 10 + User (01 to 15) + 0 | (Display shows “REG + User + – – – -) | |
| 3. Enter Master Code + # ( | Display shows “REG + User + – – – -) | |
| 4. Press * + 4 + # to exit | ||
| Change Master | 1. Press 9 + Master Code | (“SYSTEM MENU” then “TIME/DATE”) |
| 2. Press B key until “USER CODES” | ||
| 3. Press # | (Display shows “REG CODE”) | |
| 4. Press B Key | (Display shows “SYS MASTER”) | |
| 5. Press # | (Display shows “SYS + User + – – – -) | |
| 6. Enter New Master Code + # | (Display shows new Master Code) | |
| 7. Press * + 4 + # to exit | ||
|
Add Code (Regular way) |
1. Press 9 + Master Code | (“SYSTEM MENU” then “TIME/DATE”) |
| 2. Press B key until “USER CODES” | ||
| 3. Press # | (Display shows “REG CODE”) | |
| 4. Press # again | (Display shows “REG CODE 00”) | |
| 5. B key scrolls through User 01 to 15 | (Users and Codes assigned will display) | |
| 6. When desired User shows press # | (Display shows “REG + User + – – – -) | |
| 7. Enter New User Code + # | (Display shows “REG + New Code) | |
| 8. Press * + 4 + # to exit | ||
|
Delete Code (Regular way) |
1. Press 9 + Master Code | (“SYSTEM MENU” then “TIME/DATE”) |
| 2. Press B key until “USER CODES” | ||
| 3. Press # | (Display shows “REG CODE”) | |
| 4. Press # again | (Display shows “REG CODE 00”) | |
| 5. B key scrolls through User 01 to 15 | (Users and Codes assigned will display) | |
| 6. When desired User shows press # | (Display shows “REG + User + Code) | |
| 7. Enter Master Code + # | (Display shows “REG + User + – – – -) | |
| 8. Press * + 4 + # to exit | ||
|
Assign Authority |
(Usually this not needed, allows Direct Bypassing and System Tests by User) | |
| 1. Press 9 + Master Code | (“SYSTEM MENU” then “TIME/DATE”) | |
| 2. Press B key until “USER CODES” | ||
| 3. Press # | (Display shows “REG CODE”) | |
| 4. Press # again | (Display shows “REG CODE 00”) | |
| 5. B key scrolls through User 01 to 15 | (Users and Codes assigned will display) | |
| 6. When desired User shows press # | (Display shows “REG + User + Code) | |
| 7. B scrolls to “TEST OFF” then “BYPASS OFF” | ||
| 8. 2 + # turns Option ON, 1 + # turns OFF | ||
| 9. Press * + 4 + # to exit | ||