Optex Morse MDC 8 / 16 / 32 Codes
| User Codes programmed with Authorization Level 1 can program User Codes | |
| User Codes | System can have up to 16 User Codes |
|
|
|
| Change Master |
1. Master Code + PROGRAM + 1, display shows User 1 Code & Authorization Level 2. Enter new 4-digit Code + ENTER key, new code will show in display (If mistake made press CLEAR and re-enter new code before ENTER) 3. Press CLEAR to return to exit |
| Add User Code |
1. Master Code + PROGRAM + 1, display shows User 1 Code & Authorization Level 2. Press SCAN to move down User List until you find desired User 3. Enter new Authorization Level (see below list) + new 4-digit Code + ENTER (If mistake made press CLEAR and re-enter new code before ENTER) 4. Press CLEAR to return to exit |
| Authority Levels |
(User 1 Code is always Level 1 User Code) Level 1 – Arm/Disarm/Bypass/Changes User Codes (Master Code) Level 2 – Arm/Disarm/Bypass (Standard User Code) Level 3 – Arm/Disarm Only (Maintenance Code) Level 4 – Arm only (Babysitter Temp code) |
| Delete User |
1. Master Code + PROGRAM + 1, display shows User 1 Code & Authorization Level 2. Press SCAN to move down User List until you find desired User 3. Press RESET + ENTER 4. Press CLEAR to return to exit |