2Gig Go! Control Codes

    User Code Setup

  1. On the Home Screen, press SECURITY
  2. On the Security Screen, press MENU
  3. On the Menu Screen, press TOOLBOX
  4. Enter the master User Code (the factory setting is 1111)
  5. On the Toolbox Screen (1 of 3), press USER MANAGEMENT
  6. The User Management Screen displays three users at a time. Use the arrows to scroll throught he list.

    7. Note: Only the person with the Master User Code can add or change the other User Codes

    Adding a User Code

  1. Press one of the ADD USER buttons.
  2. Enter a four-digit code for the new User Code and press OK.
  3. Enter the Code again to confirm the code and press OK.
  4. A confirmation screen will display, press OK.
  5. The User Code’s Access Option Screen will be displayed. The three options determine when this User Code is valid.
  6. Select one of the three options: ALWAYS; NEVER; or BY SCHEDULE.
    • Select ALWAYS to set this User Code to always be valid. Press BACK.
    • Select NEVER to set this User Code to never be valid. Press BACK.
    • Select BY SCHEDULE set this User Code to be valid only for selected days and times. See the next section.

    Note: User Codes 0000 and 0001 are not permitted.

    Default Master: 1111

    Default Installer: 1561