Napco MA 850 / 854 Basics
| System is Chip Programmable only, it cannot be downloaded or programmed from keypad | |
| Zones |
850 – 8 zones 900 – 9 zones |
| Battery | 12 volt rechargeable Gel-Cell inside main panel |
| AC Transformer | 16.5 volts, screwed into outlet somewhere in house |
| Wireless | No |
| Downloadable | No |
| Panic Button | Police Panic only, * & # |
| Zone Status | STATUS light blinks if zone open, press 3 key for 3 seconds to display |
| Arm | 4-digit User Code (MUST have steady STATUS light) |
| Disarm | 4-digit User Code (If wrong code entered wait 5 seconds, try again) |
| Silence Alarm | 4-digit User Code |
| Clear Alarm | Press 9 for 3 seconds |
| Flashing P | Customer tried arming without steady STATUS light, disarm and try again |
| Bypass Zone | Press [S] + zone (1, 2, 3 etc), BYPASS light turns on |
| Group Bypass | (if enabled) Many interior zones can be bypassed by pressing [S] twice |
| Alarm History | Hold [S] key for 3 seconds to view last alarm |
| Smoke Reset | Press 9 for 3 seconds |
| Door Chimes | Press 5 for 3 seconds |
| Instant Doors | Press 4 for 3 seconds before or after arming, STATUS light flashes rapidly |
| Phone Test |
1. Press 6 for 3 seconds to start, keypad will begin beeping 2. If test is okay beeping will stop, failed test sounds a steady tone 3. Press 9 for 3 seconds to stop steady tone in case of failure |