Napco 825 Codes

User Codes 4, no Master or HostageCodes

Add Code 1. Open main panel, slide RUN/LOAD switch top left of circuit board to LOAD
2. Keypad lights will flash and may begin beeping
3. Press [S] + User (1 to 4) (code cannot have 0)
4. Enter New 4-digit Code
5. Slide RUN/LOAD switch to left (RUN) to exit

Delete Code 1. Open main panel, slide RUN/LOAD switch top left of circuit board to LOAD
2. Keypad lights will flash and may begin beeping
3. Press [S] + User (1 to 4) to delete
4. Slide RUN/LOAD switch to left (RUN) to exit