Zones 96 hardwired
Battery 12 volt rechargeable Gel-Cell inside main panel
AC Transformer 16-volts plugged in somewhere in house
Wireless No
Downloadable Yes
Panic Buttons
Fire Panic Press 7/F + *
Medical Panic Press 8/A + *
Police Panic Press 9/P + *
Arm Away User Code + ON/OFF (Armed light will turn ON)
Arm Stay INTERIOR + User Code + ON/OFF (Interior light will turn ON)
Arm Partitions
(If Partitioned) 		1. Press 1 to 8 for Partition 1 to 8 (Selects Partition to Arm)
2. Press * + ON/OFF (This move you to that partition)
3. Press User Code + ON/OFF to arm (User Code must have authority in partition)
Arm All
(If Partitioned) 		Press 9 + * + User Code + ON/OFF (Arms all Partitions)
(User Code must have authority in partition)
Instant Arm User Code + ON/OFF + INSTANT (Armed light will flash rapidly)
Quick Arm Press ON/OFF (If Enabled)
Disarm User Code + ON/OFF (Press RESET to clear mistakes)
(Use 0 + * + User Code + ON/OFF to disarm all Partitions)
Silence Alarm User Code + ON/OFF + RESET
Reset Smoke User Code + ON/OFF + RESET twice
Bypass BYPASS + Zone (01 to 96) (Bypassed zone will display)
or
User Code + BYPASS + Zone (01 to 96)
Siren Test User Code + Function
Press INSTANT until “Bell Test” appears
Press INTERIOR to sound siren for 2 seconds
Set Time System clock can only be set by installer or by downloading
Door Chime 1. Enter User Code then press FUNCTION to enter Program Menu
2. Press INSTANT until “Activate Chime ?”
3. Press INTERIOR to Enable or Disable
4. Press RESET to exit
Siren Test 1. Enter User Code then press FUNCTION to enter Program Menu
2. Press INSTANT until “Activate Bell Test?” appears
3. Press INTERIOR to enable and sound siren for 3 seconds
4. Press RESET to exit
Phone Test 1. Enter User Code then press FUNCTION to enter Program Menu
2. Press INSTANT until “Activate Telephone Test?” appears
3. Press INTERIOR to enable Phone Test, if Fail a trouble “3” will appear
4. Press RESET to exit
Sensor Test Arm system and activate sensors
(Wireless motions require no movement for 4 minutes prior to testing)
User Functions (This allows viewing of open Zones, Alarm History, programming of User Codes)
(Some of these options may not be viewable by customer)
1. Press FUNCTION to enter User Menu
2. FUNCTION again scrolls forward through options, BYPASS scrolls backwards
Press [BYPASS] to scroll backwards, [ON/OFF] to select
Press RESET or scroll to ******EXIT****** to exit

Keypad Display Description
DISPLAY ZONE FAULTS? – Shows all open zones
DISPLAY BYPASS? – Scrolls through all bypassed zones
DISPLAY ZONEDIRECTORY? – Scrolls through all zone descriptions
ACTIVATE BELL TEST? – Activates Siren for 2 seconds
DISPLAY PHONE NUMBERS? – Display preprogrammed Phone Numbers
DISPLAY SYSTEM TROUBLES? – Displays all troubles
DISPLAY FIRE ALARMS? – Displays previous Fire Alarms
DSIPLAY FIRE TROUBLE? – Displays Fire Zones in Trouble
DISPLAY OPEN/CLOSE SCHEDULE – Displays Arming/Disarming schedules
ACTIVATE OVERVIEW? – Displays total system status of all Partitions
ACTIVATE CHIME? – Enables/Disables Door Chime
ACTIVATE WATCH MODE? – Activates all Day Zones (W displays)
ACTIVATE GUARD TOUR? – Commercial Applications only
RESET SMOKE DEVICES? – Resets Smoke Detectors
SILENCE FIRE BELL?
RESET RELAY FIRE AUX 1?
RESET RELAY FIRE AUX 2?
RESET SYSTEM TROUBLES?
RESET SENSOR MESSAGE? – Resets “Sensor Failure” Message
START EXIT TIME?
ACTIVATE DIALER TEST? – Tests Phone Communications
DISPLAY ALARM LOG? – Displays Alarm History
Use NEXT or PRIOR to scroll events
DISPLAY TOTAL LOG? – Displays Alarms, Open/Closes etc
Use NEXT or PRIOR to scroll events
DISPLAY FIRE LOG? – Displays Fire Alarm History
Use NEXT or PRIOR to scroll events
DISPLAY OPEN/CLOSE LOG? – Displays Arm/Disarm History
Use NEXT or PRIOR to scroll events
DISPLAY SYSTEM LOG? – Displays Troubles and other events
Use NEXT or PRIOR to scroll events
TO ARM IN 1 – 4 HOURS? – AutoArming, press 1 to arm in 1 Hour
2 for 2 Hours etc)
DISPLAY AUTO-ARM SCHEDULE – Displays Auto-Arming Times
ACTIVATE PROGRAM? – Enters User Programming
ACTIVATE DOWNLOAD? – Activates Remote Downloading
******EXIT****** – Exits Function Menu and returns to Ready