Napco MA 1016E Basics
| Zones | 14 + 1 Fire Zone |
| Wireless | No |
| Resistors | 2.2K |
| Fuses | 3 Amp = Siren, 1 Amp = Aux |
| Battery | 12 volt rechargeable Gel-Cell inside main panel |
| Downloadable | Yes but very difficult |
| Panic Buttons | 9/F + # for Fire */P + # for Police B/A + # for Medical |
| Arm | Enter 4-digit code (MUST have a steady STATUS light) |
| Disarm | Enter 4-digit code |
| Instant Doors | Hold 4 key for 3 seconds before or after arming, STATUS light will flash rapidly |
| Zone Status | STATUS light blinks if zone open, press 3 for 3 seconds to view |
| Flashing P | User tried arming system without steady STATUS light, disarm and try arming again |
| Bypass | B/A + Zone (01, 02, 03 etc), BYPASS light will turn on (Use the B/A key for zero) |
| Reset | Press 9 for 3 seconds to clear mistakes, alarm displays and reset Smoke Detectors or function + 4 |
| Door Chimes | Hold 5 for 3 seconds |
| Phone Test | Hold 6 for 3 seconds, failed test will cause keypad to sound steady tone |