Napco 1010LKDL Codes
User Codes |
5, must be changed with Master Program Code (default is 123456) if this is not known customer cannot change existing codes. User Codes can be 1 to 4 digits |
Hostage Code | 2-digit Code (usually 99) + User Code when turning off system |
|
|
Add Code |
1. Press and hold 8 for 3 seconds until keypad beeps 2. Enter Master Program Code (Keypad will beep and flash) 3. Press S key + User (1 to 5) 4. Enter new 3 to 4 digit User Code (User Code cannot have 0 in it) 5. Press S key twice to exit |
Delete Code |
1. Press 8 for 3 seconds (Keypad will beep) 2. Enter Master Program Code (Keypad will beep and flash) 3. Press S key + User (1 to 5) 4. Press S key twice to delete and exit |