Napco 1010LKDL Basics
| Zones | 8 Hardwired |
| Battery | 12 volt rechargeable Gel-Cell inside main panel |
| AC Transformer | 16.5 volts, screwed into outlet somewhere in house |
| Wireless | No |
| Downloadable | Yes |
| Panic Buttons | Police Panic * and # |
| Zone Status |
STATUS Light Steady = Zones closed, Ready to Arm Status Light Blinking = Open Zones (Hold 3 for 3 seconds to view) |
| Arm | 4-digit User Code (MUST have steady STATUS light) |
| Instant Doors | Hold 4 for 3 seconds before arming (STATUS flashes rapidly) |
| Disarm | 4-digit User Code |
| Silence Alarm | 4-digit User Code, Zone will flash (Hold 9 for 3 seconds to clear) |
| Flashing P | User tried Arming without steady STATUS light, disarm and try again |
| Bypass | Press S key + Zone (1 to 8) (BYPASS light will turn on) |
| Group Bypass | (If enabled) Press S twice to bypass multiple Interior Zones |
| Smoke Reset | Press 9 for 3 seconds |
| Door Chimes | Hold 5 for 3 seconds |
| Phone Test | Hold 6 for 3 seconds, failed test will cause keypad to sound steady tone |
| Alarm History | (LCD Keypads only) Hold [B] for 3 seconds |
| Keypad Test | (LCD Keypads only) Hold * and 3 at same time |
| Zone Directory | (LCD Keypads only) Hold # for 3 seconds |