Napco 1008LKDL Codes

User Codes 5, must be changed with Master Program Code (default is 123456)
if this is not known customer cannot change existing codes. User Codes can be 1 to 4 digits
Hostage Code 2-digit Code (usually 99) + User Code when turning off system

Add Code 1. Press and hold 8 for 3 seconds until keypad beeps
2. Enter Master Program Code (Keypad will beep and flash)
3. Press S key + User (1 to 5)
4. Enter new 3 to 4 digit User Code (User Code cannot have 0 in it)
5. Press S key twice to exit

Delete Code 1. Press 8 for 3 seconds (Keypad will beep)
2. Enter Master Program Code (Keypad will beep and flash)
3. Press S key + User (1 to 5)
4. Press S key twice to delete and exit