Zones |
7 Hardwired Zones or 8 Wireless Zones using R1000 Receiver (very rare) |
Battery |
12 volt rechargeable Gel-Cell inside main panel |
AC Transformer |
16.5 volts, it is screwed into an outlet somewhere in the house |
Wireless |
Yes but VERY rarely |
Downloadable |
Yes |
Panic Buttons |
Fire Panic |
9/F and # |
Police Panic |
*/P and # |
Medical Panic |
B/A and # |
|
Zone Status |
STATUS Light Steady |
= Zones closed, Ready to Arm |
Status Light Blinking |
= Open Zones |
(Zone should show on keypad, if not press 3 for 3 seconds to view) |
|
Arm |
4-digit User Code (MUST have steady STATUS light) |
Instant Doors |
Hold 4 for 3 seconds before arming (STATUS flashes rapidly) |
Disarm |
4-digit User Code |
Silence Alarm |
4-digit User Code, Zone will flash (Hold 9 for 3 seconds to clear) |
Flashing P |
User tried Arming without steady STATUS light, disarm and try again |
Bypass |
Press [B/A] key + Zone (1 to 6) (BYPASS light will turn on) |
Group Bypass |
(If enabled) Press [B/A] twice to bypass multiple Interior Zones
(Some keypads have [S] instead of [B/A], works same way)
|
Smoke Reset |
Press 9 for 3 seconds |
Door Chimes |
Hold 5 for 3 seconds |
Phone Test |
Hold 6 for 3 seconds, failed test will cause keypad to sound steady tone |
Alarm History |
(LCD Keypads only) Hold [B] for 3 seconds |
Keypad Test |
(LCD Keypads only) Hold * and 3 at same time |
Zone Directory |
(LCD Keypads only) Hold # for 3 seconds |