Napco MA1000E Basics
Zones | 6 Hardwired | ||||||
Battery | 12 volt rechargeable Gel-Cell inside main panel | ||||||
AC Transformer | 16.5 volts, it is screwed into an outlet somewhere in the house | ||||||
Wireless | Yes but VERY rarely | ||||||
Downloadable | Yes | ||||||
Panic Buttons |
|
||||||
Zone Status |
STATUS Light Steady = Zones closed, Ready to Arm Status Light Blinking = Open Zones (Zone should show on keypad, if not press 3 for 3 seconds to view) |
||||||
Arm | 4-digit User Code (MUST have steady STATUS light) | ||||||
Instant Doors | Hold 4 for 3 seconds before arming (STATUS flashes rapidly) | ||||||
Disarm | 4-digit User Code | ||||||
Silence Alarm | 4-digit User Code, Zone will flash (Hold 9 for 3 seconds to clear) | ||||||
Flashing P | User tried Arming without steady STATUS light, disarm and try again | ||||||
Bypass | Press [B/A] key + Zone (1 to 6) (BYPASS light will turn on) | ||||||
Group Bypass |
(If enabled) Press [B/A] twice to bypass multiple Interior Zones (Some keypads have [S] instead of [B/A], works same way) |
||||||
Smoke Reset | Press 9 for 3 seconds | ||||||
Door Chimes | Hold 5 for 3 seconds | ||||||
Phone Test | Hold 6 for 3 seconds, failed test will cause keypad to sound steady tone | ||||||
Alarm History | (LCD Keypads only) Hold [B] for 3 seconds | ||||||
Keypad Test | (LCD Keypads only) Hold * and 3 at same time | ||||||
Zone Directory | (LCD Keypads only) Hold # for 3 seconds |