Napco Gem P816 Codes

Master Code User 01
Secondary Codes User 02 to 16
Duress Code 2 digits entered before disarming with regular User Code, usually 99

Add Code
1. Enter Master Code then press FUNCTION to enter Function Menu
2. If LED Keypad press FUNCTION until 17 appears
If LCD Keypad press FUNCTION until “Activate Program?” appears
3. Press INTERIOR to select
(keypad should display User 01 and User Code Example U01 1234″)
4. Set underlined cursor under User number with FUNCTION key
5. Enter User to program (01 to 16) then enter new 4 to 6-digit User Code
(If User Code is 4-digits delete last 2 digits with * 0 * 0)
6. Press ON/OFF key to save, RESET to exit

Delete Code
1. Enter Master Code then press FUNCTION to enter Function Menu
2. If LED Keypad press FUNCTION until 17 appears
If LCD Keypad press FUNCTION until “Activate Program?” appears
3. Press INTERIOR to select
(keypad should display User 01 and User Code Example U01 1234″)
4. Set underlined cursor under User number with FUNCTION key
5. Enter User to program (02 to 16) then press * 0 * 0 until code is deleted
6. Press ON/OFF key to save, RESET to exit