Napco Gem P800 Program

Enter Program Press FUNCTION + 8 + 4567 + ON/OFF Key
(Keypad should sound 3 quick beeps, ARMED light will turn On, Trouble will Flash)
Exit Program RESET + FUNCTION + 8 + <Installer Code> + ON/OFF
Move TO Location RESET + 2-digit location
Move IN Location Press INTERIOR (Also to move from toggle location)
Delete Location Press INSTANT
Default Panel 1. Power down and jumper terminal 15 to terminal 3
2. Power up, after 10 seconds ARMED, READY SYSTEM will flash + 3 beeps
3. Power back down, return wiring back to normal then power up again
(If this does not work system is locked out)
Hex Digits A=* 1 B=* 2 C=* 3 D=* 4 E=* 5 F=* 6
00 Entry/Exit Zones (Toggle Options ON/OFF)
Default
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_ON_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone is a Delay Entry/Exit Zone
OFF= Zone is not Delay Entry/Exit Zone
01 Home/Away with Delay Zones (Auto-Bypasses Motion Zones)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone is Home/Away with Delay Zone
OFF= Zone is not Home/Away with Delay Zone
02 Entry/Exit Follower Zones (Enable for any Motion Zones)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone is Entry/Exit Follower Zone
OFF= Zone is not Entry/Exit Follower Zone
03 Auto Bypass Re-Entry Zones (Normally Leave all OFF)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone Fault allows Arming, Arms when Zone Restores
OFF= Zone Fault does not allow Arming
04 24 Hour Zones (Fire/Panic) (Toggle 1 to 4 ON for Smoke/Panic Zones)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
>
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone is 24 Hour Zone
OFF= Zone is not 24 Hour Zone
05 40 ms Loop Response (Normally turn all lights ON)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone Response 40 ms
OFF= Zone Response 750 ms
06 Open Circuit Zones (Normally turn all lights ON)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone is Normally Open Zone
OFF= Zone is Normally Closed Zone
07 Burglary Steady Output (Normally turn all lights ON)
Default
ON
ON
ON
ON
ON
ON
ON
ON 		I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone Alarm activates Siren Output
OFF= Zone Alarm is Silent

(If Silent Panic or Holdup toggle zone light OFF)

08 PGM Output (Normally turn all lights ON)
Default
ON
ON
ON
ON
ON
ON
ON
ON 		I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = PGM Activates on Zone Trip until Reset
OFF= PGM not Enabled on Zone Trip
09 Selective Bypass
Default
ON
ON
ON
ON
ON
ON
ON
ON 		I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone Bypassing Allowed
OFF= Zone Bypassing Not Allowed
10 Exit Delay I_0_I_6_I_0_I (001 to 255 Seconds)
11 Entry Delay I_0_I_3_I_0_I (001 to 255 Seconds)
12 Bell/Siren Timeout I_0_I_0_I_6_I (001 to 255 Minutes)
13 Fire (Pulsed Timeout (000=Disabled) I_0_I_0_I_0_I (000 to 255 Minutes)
14 Test Timer Interval I_0_I_0_I_1_I (001 to 255 Days)
15 Line Cut Time (Phone Monitor) I_0_I_0_I_0_I (010 to 255 Seconds 000=Disable)
16 Wireless Supervisory Timer I_1_I_2_I (01 to 26 in Hours)
17 Wireless Smoke Supervisory Timer I_8_I (01 to 8 in Hours)
18 Test Timer Offset I_1_I_2_I (01 to 23 in Hours)
20 Keypad Features 1 (Toggle Options ON/OFF)
Default
OFF
OFF
ON
OFF 		I_ON_I
I_ON_I
I_ON_I
I_ON_I 		Keypad Fire Enabled
Keypad Medical Enabled
Keypad Police Panic Enabled
Ambush is 8th User Code
21 Keypad Features 2 (Toggle Options ON/OFF)
Default
ON
OFF
ON
OFF 		I_ON_I
I_ON_I
I_ON_I
I_OFF_I 		Keypad Panic Audible
Entry/Entry Delay with Urgency Beeps
Display Bypass while Armed
Disable Keypad Keypress Beeps
22 Miscellaneous Features 1 (Toggle Options ON/OFF)
Default
OFF
ON
ON
OFF 		I_OFF_I
I_ON_I
I_ON_I
I_ON_I 		Abort Delay
Easy Arm/Easy Exit (Quick Arm/Quick Exit)
Swinger Shutdown Enabled
Bell on Phone Line Cut if Armed
23 PGM Features 1 (Toggle Options ON/OFF)
Default
OFF
ON
ON
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Audio Verification (If using Variphone 2-way Board)
Access Output to PGM for 5 seconds with FUNCTION + 3
PGM Follows Keypad Sounder
Keyfob/Keyswitch Chirp (1 Chirp if Armed, 2 Chirps if Disarmed)
24 PGM Features 2 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		PGM Activates on Fire Alarm
PGM Activates on AUX Alarm
PGM Activates on Panic Alarm
PGM Activates during Test Timer Report
25 PGM Features 3 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		PGM Activates 15 Minutes after AC Fail
PGM Activates on Low Battery
PGM Activates on a Trouble Condition
PGM Activates if System Armed
26 Miscellaneous Features 2 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Momentary Keyswitch Arming on Zone
Reserved (Leave OFF)
Inhibit Fail to Communicate Display
Inhibit Low Battery Display
30 Account 1 I_ _I_ _I_ _I_ _I
31 Receiver Phone 1 I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I
Press INSTANT to erase Digits 4 Second Pause = D (* 4)
32 Receiver Format Phone 1 I_6_I

0 = Disabled 4 = Universal High Speed
1 = Ademco Slow 5 = Reserved
2 = Radionics Slow 6 = Contact ID
3 = Silent Knight Fast 7 = Pager
33 Receiver 1 Options (Toggle Options ON/OFF)
Default
ON
OFF
OFF
OFF 		I_ON_I
I_OFF_I
I_OFF_I
I_OFF_I 		2300 Handshake/Kissoff
Sumcheck
Single Digit
No Handshake/Pager Enabled
34 Zone Report Enable Phone 1 (Toggle Options ON/OFF)
Default
ON
ON
ON
ON
ON
ON
ON
ON 		I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I
I_ON_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone Alarms sent to Phone 1
OFF= Zone Alarms not sent to Phone 1
35 Zone Restore Phone 1 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone Restorals sent to Phone 1
OFF= Zone Restorals not sent to Phone 1
36 System Reporting Phone 1 (Toggle Options ON/OFF)
Default
OFF
OFF
ON
OFF 		I_ON_I
I_ON_I
I_ON_I
I_OFF_I 		Keypad Fire Panic Report Enable
Keypad Medical Panic Report Enable
Keypad Police Panic Report Enable
Test Timer Report Enable
37 System Reporting Phone 1 (Toggle Options ON/OFF)
Default
OFF
ON
OFF
ON 		I_ON_I
I_ON_I
I_ON_I
I_ON_I 		AC Fail Report Enable (15 Min Delay)
Low Battery Report Enable
Trouble Report Enable
Fire Report
38 System Restore Report Phone 1 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		AC Fail Report Enable (15 Min Delay)
Low Battery Report Enable
Trouble Report Enable
Fire Restore Report Enable
39 Open/Close Report Phone 1 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		User 1 Reporting
User 2 Reporting
User 3 Reporting
User 4 Reporting
User 5 Reporting
User 6 Reporting
User 7 Reporting
User 8 Reporting 		ON= Opening/Closings for this User Enabled
OFF= Opening/Closings for this User Disabled
40 Account 2 I_ _I_ _I_ _I_ _I
41 Receiver Phone 2 I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I
Do not add pager here, use Receiver Phone 3 instead
42 Receiver Format Phone 2 I_6_I

0 = Disabled 4 = Universal High Speed
1 = Ademco Slow 5 = Reserved
2 = Radionics Slow 6 = Contact ID
3 = Silent Knight Fast 7 = Pager
43 Receiver 2 Options (Toggle Options ON/OFF)
Default
ON
OFF
OFF
OFF 		I_ON_I
I_OFF_I
I_OFF_I
I_OFF_I 		2300 Handshake/Kissoff
Sumcheck
Single Digit
No Handshake/Pager Enabled
44 Dialing Prefix Phone 1, 2 & 3 (Program 9 here if needed to dial out)
I_ _I_ _I_ _I_ _I
45 Communicator Features 1 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_ON_I
I_ON_I
I_OFF_I
I_OFF_I 		Communicator Enabled
DTMF with Rotary Backup
DTMF Only
Backup to Telco 2
46 Communicator Features 2 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		No Dial Tone Detection
2:1 Rotary Dialing
Backup if Less than 4 Attempts
Reserved
47 Pager Leading Digits (Up to 30 Digits)
I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I
Note: Don’t use pager number here, this is extra info that can show up on the pager screen
48 Pager Trailing Digits (Up to 10 Digits)
I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I
Note: Don’t use pager number here, this is extra info that can show up on the pager screen
49 Pager Operation (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Skip Alarm Data (If ON sends only Opening/Closings to pager)
Reserved
Reserved
Reserved
50 Account 3 (Do not Program)
I_ _I_ _I_ _I_ _I
51 Receiver Phone 3 (up to 12 digits)
I_P_I_A_I_G_I_E_I_R_I_ _I_H_I_E_I_R_I_E_I_ _I
Note: If using Pager add pauses (* 4) after phone number (at least 3 should work)
52 Receiver Format Phone 3   I_X_I   Enter 7 here if using Pager
53 Receiver 3 Options (Toggle Options ON/OFF)
Default
ON
OFF
OFF
OFF 		I_ON_I
I_OFF_I
I_OFF_I
I_OFF_I 		2300 Handshake/Kissoff
Sumcheck (All OFF if using Pager)
Single Digit
No Handshake/Pager Enabled
54 Zone Report Phone 3 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone Alarms sent to Phone 3
OFF= Zone Alarms not sent to Phone 3

(Turn this section ON for if using Pager)

55 Zone Restore Phone 3 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8 		ON = Zone Restorals sent to Phone 3
OFF= Zone Restorals not sent to Phone 3
56 System Report Phone 3 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Keypad Fire Panic Report Enable
Keypad Medical Panic Report Enable
Keypad Police Panic Report Enable
Test Timer Report Enable
57 System Report Phone 3 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		AC Fail Report Enable (15 Min Delay)
Low Battery Report Enable
Trouble Report Enable
Fire Report Enable
58 System Restore Phone 3 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		AC Fail Restoral Report Enable (15 Min Delay)
Low Battery Restoral Report Enable
Trouble Restoral Report Enable
Fire Restoral Report Enable
59 Open/Close Reports Phone 3 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		User 1 Reporting Enable
User 2 Reporting Enable
User 3 Reporting Enable
User 4 Reporting Enable (Turn this section ON for if using Pager)
User 5 Reporting Enable
User 6 Reporting Enable
User 7 Reporting Enable
User 8 Reporting Enable
60 4/2 Zone Report Codes
Default
3
3
3
3
3
3
3
3 		I_3_I
I_3_I
I_3_I
I_3_I
I_3_I
I_3_I
>
I_3_I
I_3_I 		Zone 1 Alarm Report Code (This is 1st digit, 2nd digit sent automatically)
Zone 2 Alarm Report Code
Zone 3 Alarm Report Code
Zone 4 Alarm Report Code
Zone 5 Alarm Report Code
Zone 6 Alarm Report Code
Zone 7 Alarm Report Code
Zone 8 Alarm Report Code
61 Contact ID Report Codes (Only used if Contact ID is selected in section 32)
Default
3
3
3
3
3
3
3
3 		I_3_I
I_3_I
I_3_I
I_3_I
I_3_I
I_3_I
I_3_I
I_3_I
Zone 1 Alarm Report Code
Zone 2 Alarm Report Code
Zone 3 Alarm Report Code
Zone 4 Alarm Report Code
Zone 5 Alarm Report Code
Zone 6 Alarm Report Code
Zone 7 Alarm Report Code
Zone 8 Alarm Report Code    
Contact ID Report Codes (1st digit, 2nd is Zone)
1 = Fire
2 = Panic
3 = Burglary
4 = Holdup
5 = General Alarm 		6 = Reserved
7 = Gas Alarm
8 = Heat Alarm
9 = Reserved
A = Auxiliary
B = 24 Hr Alarm
62 Zone Restore/Trouble Report Codes
Default
E
F 		I_0_I
I_0_I 		Zone 1, 2, 3, 4, 5, 6, 7, 8 Restore Code
Zone 1, 2, 3, 4, 5, 6, 7 ,8 Trouble Code
63 System Report Codes (Auto-reports regardless of report code if Contact ID is used)
Default
11
23
21
FF
F9
F8
F1
11 		I_1_I_1_I
I_2_I_3_I
I_2_I_1_I
I_F_I_F_I
I_F_I_9_I
I_F_I_8_I
I_F_I_1_I
I_1_I_1_I 		Keypad Fire Panic (7/F & *)
Keypad Aux Panic (8/A & *)
Keypad Police Panic (97P & *)
Test Timer
AC Failure
Low Battery
Trouble (Receiver Fail/Tamper/Wireless Low Bat)
Fire Zone
64 System Restore Report Code
Default
E I_0_I (Receiver Fail/Tamper/Wireless Low Bat)
65 Open/Close Report Code
Default
C
B 		I_0_I
I_0_I 		Closing Report Code
Opening Report Code
66 Ambush/Duress Report Code
Default
22 I_2_I_2_I
67 Enhanced Communication Phone 1 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_ON_I
I_OFF_I
I_OFF_I
I_OFF_I 		Opening After Alarm (Enables Cancel)
Conditional Closing
Reserved
Reserved
68 Enhanced Communication Phone 3 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Opening After Alarm
Conditional Closing
Reserved
Reserved
Wireless Programming (Wireless AND Hardwired devices can occupy the same zone)
Sample Sensor
#71 Zone 1 Wireless Serial Number Serial Number
I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I 		  Point  
I_ _I

Program sensor by entering 7-Digit Serial Number + Point
Strap off External Sensor Terminals if using Internal Point 		Internal Reed = Point 1
External Sensors = Point 2
Smoke Detector = Point 1
Motion Detector = Point 1
Glassbreaks = Point 1
72 Zone 2 Wireless Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
73 Zone 3 Wireless Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
74 Zone 4 Wireless Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
75 Zone 5 Wireless Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
76 Zone 6 Wireless Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
75 Zone 7 Wireless Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
76 Zone 8 Wireless Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
Aux
Serial Number 1 2
81 Keyfob 1 Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I_ _I I_ _I_ _I
82 Keyfob 2 Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I_ _I I_ _I_ _I
83 Keyfob 3 Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I_ _I I_ _I_ _I
84 Keyfob 4 Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I_ _I I_ _I_ _I
Top 2 buttons = ARM & DISARM, bottom   &nsbp; 2 = AUX 1 & 2 can be programmed for several functions

1 = Police Panic
2 = Aux/Medical
3 = Bell ON
4 = PGM Output
5 = Access on PGM
7 = FULLY ARM (Use ON key + Selected AUX key programmed as 7
8 = STAY ARM (Use ON key + Selected AUX key programmed as 8
Serial Number Point
85 Wireless Smoke 1 Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
86 Wireless Smoke 2 Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
87 Wireless Smoke 3 Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
88 Zone 5 Wireless Serial Number I_ _I_ _I_ _I_ _I_ _I_ _I : I_ _I I_ _I
90 Download Phone Number I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I_ _I
91 Ring Count
Default
09 I_ 0_I_ 9_I (00 to 15)
92 Downloading Features (Toggle Options ON/OFF)
Default
ON
OFF
OFF
OFF 		I_ON_I
I_ON_I
I_ON_I
I_OFF_I 		Ring Method (# of Rings)
Answering Machine Over-Ride
FUNCTION + 6 Download Enable
Wireless Signal Strength Test Mode
93 Auto Download ID # (Do not Program)
Default
I_ _I_ _I
94 Installer Code (Leave this Default Please)
Default
4567 I_4_I_5_I_6_I_7_I
95 User 1 Master Code
Default
1234 I_ _I_ _I_ _I_ _I
96 Dealer Options 1 (Toggle Options ON/OFF)
Default
OFF
ON
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		Dealer Code (Panel) Lockout Enable
User Code 1 Lockout
UL Household Fire
Fire Trouble on Fire LED
97 Dealer Options 2 (Toggle Options ON/OFF)
Default
OFF
OFF
OFF
OFF 		I_OFF_I
I_OFF_I
I_OFF_I
I_OFF_I 		International Dialing Protocol
Invert Bell Output
System Trouble Auto Reset
User 1 Code Program Only
98 Dial Attempts
Default
9 I_9_I (1 to F)