| GEM P-400 |
| Master Code |
User 1 |
| Secondary Codes |
User 2 to 3 |
| Duress Code |
User 4 (May not be enabled) |
|
| GEM P800 |
| Master Code |
User 1 |
| Secondary Codes |
User 2 to 7 |
| Duress Code |
User 8 (May not be enabled) |
|
|
| Add Code |
| 1. FUNCTION + 8 + Master Code + ON/OFF (Armed, Status flashes, 4 beeps) |
| 2. Enter User |
(Gem-P400 1 to 4) (Selected User light will Flash)
(Gem-P800 1 to 8)
|
| 3. Enter new 4-digit User Code (Selected User light turns ON) |
| 4. Press RESET to exit |
|
| Erase Code |
| 1. FUNCTION + 8 + Master Code + ON/OFF (Armed, Status lights will flash) |
| 2. Enter User |
(Gem-P400 2 to 4) (Selected User light will Flash)
(Gem-P800 2 to 8)
|
| 3. Press INSTANT key (Selected User light turns OFF) |
| 4. Press RESET to exit |
|
