1. Home
  2. My Alarm
  3. My Alarm
 

MyAlarm Basics

Zones 14 Wireless
Batteries
Main 6 volt 1.2AH Mini Yuasa NP 1.2-6 or Rocket ES 1.2-6
(Battery is located within base, undo 4 screws to replace, may be hard to find)
Medical Pendant 12-Volt Alkaline Model GP123
Door Contact 1 9-Volt Alkaline
Motion Sensor 1 9-Volt Alkaline
Smoke Detector 1 or 2 9-Volt Alkaline
2-Button Remote 1 9-Volt Alkaline
4-Button Remote 1 9-Volt Alkaline
Remote Keypad 1 9-Volt Alkaline
Downloadable No
Panic Buttons Press Panic + Blue Circle Button to activate (see Keypad)
MyAlarms come in 5 different setups, each has their own method of Arming/Disarming
Customer should know which method below Arms/Disarms their system
Console will not show what Zones are open
Arm Away

One of these
will work

Style A = * # 61 (System gives short Tone)
Style B = * # 64 (Protection Level LED Flashes)
Style C = * # 55
Style D = * # 88
Style E = * # 78 Entry/Exit Delay = 45 Seconds and cannot be changed
Arm Home Style A = * # 60 (System gives short Tone)
Style B = * # 63 (Protection Level LED turns ON)
Style C = * # 54
Style D = * # 87
Style E = * # 77
Disarm Style A = * # 62 (System gives long Tone)
Style B = * # 65 (Protection Level LED turns OFF)
Style C = * # 56
Style D = * # 89
Style E = * # 79
Reset System Press 0, If Console fails to disarm press RESET on bottom to turn OFF then ON
Manual Bypass Press TRBL button + Zone (01 to 14) (Zone Lights show Bypass)
Force Bypass Open Zone and Arm system, Console gives protest beeps, press #
Door Chimes Press * # 23 to Enable
Press * # 24 to Disable
System Test 1. Press * # 35 to begin
2. Open Doors & Windows, Console will beep indicating OK
3. Press Panic Buttons, Console will beep indicating OK
4. Hold TEST Button on Smoke Detector, Console will beep indicating OK
5. Press 0 to end
Phone Test Press LINE TEST, system will call Monitronics, Ringer Mode LED turns ON
Phone Options (Yes this is also a Telephone)
Ringer Switch Right side of Console, Slide UP to turn off Call Ringer, down turns ON
Add Store
Phone Number 		1. Press * * (Should hear short beep)
2. Enter Location to store number (01 to 20)
3. Enter Phone Number then * (should hear short beep)
Delete Stored
Phone Number 		1. Press * * (Should hear short beep)
2. Enter Location to store number (01 to 20)
3. Press * (should hear short beep)