1. Home
  2. Moose
  3. Moose ZX400/
  4. Moose ZX400/
 

We cannot do downloads for any Moose panels!
Zones 12 Regular Zones + 1 fire Zone, up to 28 with Wireless or Zone Expanders
Downloadable No
AC Transformer 16-volts plugged in somewhere in house
Battery
Main Panel 12 volt rechargeable Gel-Cell
Door/Window 1 3-Volt Lithium Model DL123A
Glassbreaks 2 3-Volt Lithium Model DL123A
Motions 1 3-Volt Lithium Model DL123A
Keyfob 1 3-Volt Lithium Flat type (CR2032)
Remote Panic 1 3-Volt Lithium Flat type (CR2032)
Wireless Yes but usually is all Hardwired
Panic Buttons Fire, Police and Medical, press twice or hold for 3 seconds to activate
Arm Away AWAY Key + User Code
Arm Stay STAY Key + User Code
Arm Night NIGHT Key + User Code
Arm Instant Arm with above commands, press ENTER during Exit Delay
Force Arm Arm with above commands + User Code + Arm again within 5 seconds
(To force Arm in Away mode press AWAY Key + User Code + AWAY key)
Quick Arm Press AWAY, STAY or NIGHT Key + ENTER
Disarm OFF/CANCEL Key + User Code
Silence Alarm OFF/CANCEL Key + User Code
Bypass Zones 4 + User Code + Zone (01 to 12) + ENTER + ENTER
Force Bypass 4 + User Code + 99 + ENTER + ENTER (Fire Zones cannot be bypassed)
Remove Bypass 4 + User Code + 0 + ENTER + ENTER (Or try Arming then Disarming)
Smoke Reset 7 + User Code
Alarm Memory 2 + User Code (Zone light will show last alarm)
Door Chimes 6 Key + User Code to turn On or Off
Phone Test 8 + User Code + 4 (4 beeps if okay, Trouble if Failure)
Sensor Test 8 + User Code + 1 (Beep if zone open, CLEAR to quit)
Set Clock (ZX400-410 Only, do NOT do this with ZX-200-210!)
1. Press 9 + Master Code (Ready and Trouble should flash)
2. Press 2 and enter Time (2: 15 PM would be 1415)
4. Enter Month/Day/Year (7/2/99 would be 070299)
5. Press ENTER to exit