Moose Z911 Trouble
| POWER | ON | Normal |
| OFF | No AC Power | |
| Flashing | Backup battery low | |
| READY | ON | Zones closed, Ready to Arm |
| OFF | One or more Zones are open (see Status Command) | |
| Slow Flash | One or more Zones are Bypassed | |
| Fast Flash | Burg Zone open and at least 1 zone is bypassed | |
| ARMED | ON | System is Armed |
| OFF | System is Disarmed | |
| Flashing | System had an Alarm | |
| INTERIOR | ON | Interior Zones are Enabled |
| OFF | Interior Zones are Disabled | |
| ON Flashing | System has Failed to Communicate | |
| OFF Flashing | Panic B (Fire) was activated | |
| DELAY | ON | Entry Delay on exterior Zones normal |
| OFF | Entry Delay on exterior Zones OFF | |
| ON Flashing | Internal System failure | |
| OFF Flashing | Panic C (Medical) was activated | |
| Fire Light | ON | Panic A (Fire) was activated |
| OFF | Normal | |
| Flashing | Panic A (Fire) or a supervisory zone is in Trouble | |
| All Lights | Scrolling | Keypad wire broken or internal trouble |
| Flashing | System in Program Mode | |
| 1st 7 Lights | Flashing | Program Mode entered and system is in Download Mode |
| Reset Smoke |
7 + User Code + * (If this does NOT reset smoke set for service, smoke is bad) |
|
| Sensor Test | 8 + User Code, open door/windows, keypad beeps, press * to end | |