Moose Z911 Codes

System uses Master Program Code (Usually 98765) to program
User Codes User 1 to 4
Hostage Code User 4 (May not be enabled)

User Codes can be 2 to 5 digits in length, a code can start with 0 but not have 0 within
Example: Master Code can be 0123 but cannot be 1023

Add Code
1. Press 9, enter Master Program Code (Keypad should give 1 beep)
2. Enter User Number (1 to 4) (Code 1 is Main Code, Code 4 is usually Duress)
3. Enter User Authorization (1 or 9) (1 = Standard User Code, 9 = Duress)
4. Enter New User Code (If less than 5 digits enter 0’s at end)
5. Keypad should give one long beep and exit
Example: To change User Code 2 to 8456 press 9 98765 2 1 84560

Erase Code
1. Press 9, enter Master Program Code (Keypad should give 1 beep)
2. Enter User Number (1 to 4) (Code 1 is Main Code, Code 4 is usually Duress)
3. Enter User Authorization 0
4. Enter 00000 (5 zeros)
5. Keypad should give one long beep and exit
Example: To delete User Code 2 press 9 98765 2 0 00000

Important If customer has User Code that starts with 1 they may think
that 1 is part of the code instead of really being the Arm/Disarm key
Keep this in mind when changing User Codes or using system