Moose Z911 Basics
| We cannot do downloads for any Moose panels! | |||||||
| Zones | 6 Hardwire | ||||||
| Battery | 12 volt rechargeable Gel-Cell inside main panel | ||||||
| AC Transformer | 18 Volt 35 AH | ||||||
| Wireless | No | ||||||
| Downloadable | No | ||||||
| Panic Buttons |
|
||||||
| Keypad has flip-up cover, open shows fuctions of keys, closed shows system status | |||||||
| Arm | Press 1 + User Code (Ready To Arm light must be ON) | ||||||
| Arm Stay |
1. 4 + User Code (Interior light turns OFF 2. Arm system with 1 + User Code |
||||||
| Instant Doors | 5 + User Code (Instant light turns ON) | ||||||
| Disarm | 1 + User Code (Armed light turns OFF) | ||||||
| Silence Alarm | 1 + User Code (Armed light turns OFF) | ||||||
| Reset Alarm | Press * to stop flashing and wrong User Codes | ||||||
| Check Zones | 2 + User Code (Open zones show for 8 seconds) | ||||||
| Alarm Memory | 3 + User Code, (Last alarm will show) | ||||||
| Bypass Zones | # + zone (1 to 8) (Ready to Arm starts flashing) | ||||||
| Remove Bypass | # + 9 (Ready to Arm stops flashing | ||||||
| Door Chimes | 6 + User Code (Motions may beep too) | ||||||
| Reset Smoke |
7 + User Code + * (If this does NOT reset smoke set for service, smoke is bad) |
||||||
| Sensor Test | 8 + User Code, open door/windows, keypad beeps, press * to end | ||||||