Moose Z800 / Z950 Codes

Master Code User 1
Secondary Codes User 2 to 7
Hostage Code User 8 (May not be enabled)

Add Code 1. Press 9 for 3 seconds (Keypad sounds 1 beep)
2. Enter Master Code (Keypad sounds 2 beeps, lights flash))
3. Enter User Number (1 to 8) then # (Keypad sounds 3 beeps)
4. Enter New 4-digit User Code (Keypad sounds long beep then exits)
Example: To change User Code 2 to 8456 press 9 + Master Code + 2 # 8456

Erase Code 1. Press 9 for 3 seconds (Keypad should give 1 beep)
2. Enter Master Code (Keypad sounds 2 beeps, lights flash))
3. Press 12 + # (Keypad sounds 3 beeps)
4. Enter User to Delete (2 to 8) + # (Keypad gives 1 long beep then exits)
Example: To delete User Code 2 press 9 + Master Code + 20 98765 22 # 2 #

Reset master Enter programming and go to 298# then * twice, this resets master to 1245