Moose Z700 / Z900 Codes

Master Code User 1
Secondary Codes User 2 to 5
Hostage Code User 6 (May not be enabled)

Add Code 1. Press 9 for 3 seconds (Keypad sounds 1 beep)
2. Enter Master Code (Keypad sounds 2 beeps, lights flash))
3. Enter User Number (1 to 6) then # (Keypad sounds 3 beeps)
4. Enter New 4-digit User Code (Keypad sounds long beep then exits)
Example: To change User Code 2 to 8456 press 9 + Master Code + 2 # 8456

Delete Code 1. Press 9 for 3 seconds (Keypad sounds 1 beep)
2. Enter Master Code (Keypad sounds 2 beeps, lights flash))
3. Press 10 + # (Keypad sounds 3 beeps)
4. Enter User to Delete (2 to 6) + # (Keypad gives 1 long beep then exits)
Example: To delete User Code 2 press 9 + Master Code + 10 # 2 #

Master unknown Enter programming and go to location #250 to reset to 1245