Moose Z700 / Z900 Basics
| We cannot do downloads for any Moose panels! | |
| Zones | 6 Hardwire Only Zones |
| Battery | 12 volt rechargeable Gel-Cell inside main panel |
| AC Transformer | 16.5 volts, screwed into outlet in house |
| Wireless | No |
| Downloadable | No |
| Panic Buttons |
Z900 – Police, Fire, Medical (Press twice or hold for 3 seconds) Z700 – Hold * and # (Usually Police Panic) |
| Arm | Enter User Code (Must have READY light) |
| Stay Arm | Hold 4 for 3 seconds before arming |
| Instant Doors | Not available on this system |
| Disarm | 4-digit Code (Press * if wrong Code entered) |
| Reset Alarms | Press * |
| Smoke Reset |
Hold 7 key for 3 seconds then press * (If this does NOT reset smoke set for service, smoke is bad) |
| Alarm Memory | Hold 3 for 3 seconds until beep (Keypad will show last alarm) |
| Bypass Motions | Hold 4 for 3 seconds until beep (Motion zone should start flashing) |
| Bypass Zones | Press # + Zone (1 to 6) (Bypassed Zone should Flash) |
| Remove Bypass | Press # 9 or Arm & Disarm (Zone light will stop flashing) |
| Door Chimes | Hold 6 for 3 seconds (Enables or Disables) |
| Sensor Test |
1. Hold 8 for 3 seconds until beep 2. Open doors, windows and walk by motions, keypad beeps each time 3. To exit press * or arm/disarm system |