Moose Z1200 Z1250 Codes

Keypads have 3 function keys below Display, each works with whatever is displayed above
Up to 99 User Codes
Add Code 1. Press Menu (Blue Triangle) until display reads PROG. OPTIONS
2. Press key directly below
3. Enter Master code
4. Press keys under USER CODES
5. Keypad will show User 1 Information, for next user press NEXT function key
6. Enter new code (3 to 5 digits)
7. Press key below STORE
User Names 1. After adding User Code press right function key (Under ARROW)
2. Enter User Name using the following keys

1 = 0 1 2 3 4 5 6 7 8 9 : ; < = > ? (at) 6 = M N O
2 = A B C
3 = D E F
4 = G H I
5 = J K L
7 = P Q R S
8 = T U V 9 = W X Y Z
0 = <space> ! ” # $ % & ‘ ( ) * + , – . /

Example: To program word BILL
Press 2 twice (for B), press right Arrow key to move to next
Press 4 3 times (for I), press right Arrow key to move to next
Press 5 3 times (for L), press right arrow key to move to next
Press 5 3 times (for L)
3. Press NEXT to finish

Erase Code 1. Press Menu (Blue Triangle) until display reads PROG. OPTIONS
2. Press key directly below
3. Enter Master code
4. Press key under USER CODES
5. Keypad shows User 1 Info, for next user press NEXT key
6. Enter 0
7. Press key below STORE