Moose Z1100E Codes

System uses Master Program Code (Usually 98765) to program

User Codes

User 1 to 17

Hostage Code

User 17 (May not be enabled)

User Codes can be 2 to 5 digits in length, a code can start with 0 but not have 0 within
Example: Master Code can be 0123 but cannot be 1023

Add Code

1.	Press 9, enter Master Program Code	(Keypad beeps 2 beeps)
2.	Enter User Number (1 to 17) then #	(Keypad beeps 3 times)
3.	Enter New 3 to 5-digit User Code	(If less than 5 digits enter 0 at end)
	(Keypad should give one short beep then one long beep and exit) Example: To change User Code 2 to 8456 press 9 98765 2 # 84560

Delete Code

1.	Press 9, enter Master Program Code	(Keypad beeps 2 beeps)
2.	Press 22 + # + User to Delete + #	(Keypad gives 1 long beep then exits)
	Example: To delete User Code 2 press 9 98765 22 # 2 #

Important

If customer has User Code that starts with 1 they may think
that 1 is part of the code instead of really being the Arm/Disarm key
Keep this in mind when changing User Codes or using system