| System uses Master Program Code (Usually 98765) to program |
| User Codes |
User 1 to 4 |
| Hostage Code |
User 4 (May not be enabled) |
|
User Codes can be 2 to 5 digits in length, a code can start with 0 but not have 0 within
Example: Master Code can be 0123 but cannot be 1023
|
| Add Code |
| 1. |
Press 9, enter Master Program Code |
(Keypad should give 4 or 5 beeps) |
| 2. |
Enter User Number (1 to 4) |
(Keypad should give 3 or 4 beeps) |
| |
(User 1 is Main Code, User 4 usually Duress) |
| 3. |
Enter User Authorization (1 or 9) |
(1 = Standard User Code, 9 = Duress) |
| 4. |
Enter New User Code |
(If less than 5 digits enter 0 at end) |
| 5. |
Keypad should give 4 or 5 beeps then one long beep and exit |
|
Example: To change User Code 2 to 8456 press 9 98765 2 1 84560 |
|
| Erase Code |
| 1. |
Press 9, enter Master Program Code |
(Keypad should give 4 or 5 beeps) |
| 2. |
Enter User Number (1 to 4) |
(Keypad should give 3 or 4 beeps) |
| |
(User 1 is Main Code, User 4 usually Duress) |
| 3. |
Enter User Authorization (1 or 9) |
(1 = Standard User Code, 9 = Duress) |
| 4. |
Enter the # sign 4 times if 4 digit code, 5 if 5 digit code |
| 5. |
Keypad should give 4 or 5 beeps then one long beep and exit |
| |
Example: To delete User Code 2, press 9 98765 2 1 #### |
|
| Important |
If customer has User Code that starts with 1 they may think
that 1 is part of the code instead of really being the Arm/Disarm key
Keep this in mind when changing User Codes or using system
|
