Moose Z1100 System II Codes
| System uses Master Program Code (Usually 98765) to program | |
| User Codes | User 1 to 9 |
| Hostage Code | User 9 (May not be enabled) |
|
|
|
|
User Codes can be 3 to 5 digits in length, a code can start with 0 but not have 0 within Example: Master Code can be 0123 but cannot be 1023 |
|
| Add Code |
1. Press 9, enter Master Program Code (Keypad sounds 4 beeps) 2. Enter User Number (1 to 9) + # 3. Enter New User Code (If less than 5 digits enter 0 at end) 4. Keypad should give 3 beeps and exit Example: To change User Code 2 to 8456 press 9 98765 2 1 84560 |
| Erase Code |
1. Press 9, enter Master Program Code (Keypad should give 1 beep) 2. Enter User to Delete (2 to 9) + # 3. Enter # # # # # Keypad gives 3 beeps and exits Example: To delete User Code 2 press 9 98765 2 # # # # # # |
| Important |
If customer has User Code that starts with 1 they may think that 1 is part of the code instead of really being the Arm/Disarm key Keep this in mind when changing User Codes or using system |
|
Default Program Code |
Power up while holding the Program Button and press 10 + # + 98765 |