Linear Pers 2400 Health Monitor Program
| Format | Contact ID or 4/2 |
| All Programming is done by Downloading, all the tech can do is add sensors | |
| RA2400 Program |
1. Connect Phone Line from Modem to PERS2400 2. Press Test Button, keypad should sound 4 beeps 3. Set RA2400 to connect then press EMERGENCY button for 5 seconds |
|
Compatible Wireless |
DXS-21 & DXS-23 Remote DXS-71 Smoke Detector DXS-31 Door/Window DXT-41 & DXT-42 2 Keyfobs DSX-62 & DXS-63 Wrist Panics DXT-61A Remote Panic DXS-54 Motion Detector |
|
Add Sensors (by Customer) |
1. Hold CLEAR button for 5 seconds, keypad should beep 5 times 2. Activate Transmitter, keypad should sound 1 beep indicating sensor learned (If keypad sounds 1 long beep = Sensor already learned or system full, 16 Max) |
|
Add Sensors (by Installer) |
1. Press TEST button in back of Keypad, should hear 4 beeps 2. Press TEST button again, should hear 5 beeps 3. Activate Transmitter, keypad should sound 1 beep indicating sensor learned (If keypad sounds 1 long beep = Sensor already learned or system full, 16 Max) |
| Delete Sensors |
1. Press TEST button in back of Keypad, should hear 4 beeps 2. Press and HOLD TEST button again, 6 beeps = All sensors are erased |