| This is a wireless Medical Panic, there usually are no zones, sits on table |
| Battery |
6 Volt 1.2 Amp Gel Cel |
| AC Transformer |
9 Volts DC, screwed into outlet somewhere in house |
| Emergency |
Press to send 24 Hour Panic |
| Test/Cancel |
Sends test signal to Monitoring Station, pressing after alarm sends Cancel |
| Power LED |
| ON |
Normal |
| OFF |
No AC Power |
| Flashing |
Low Battery |
|
| Call-in-Progress |
ON when system is communicating with Monitoring Station |
Low Transmitter
Battery LED
|
Indicates if Wireless sensor or panic battery is low |
| This panel can only be programmed with P9 Programmer |
