GE / ITI / UC SX IV Codes
| Master Code | 1 |
| Secondary Code | 1 (Secondary Code cannot direct bypass sensors) |
| Duress Code | 1 |
|
|
|
| Main Panel confirms all code changes with “Bouncing Balls” on display | |
| Change Master |
1. Turn Program Switch in Main Panel ON 2. Press both AUXILIARY keys on Wireless Keypad 3. Enter New Master Code (System should confirm by displaying “Bouncing Balls” on display) |
| Change Code |
1. Enter Master Code (Don’t turn on Program Switch) 2. Press STATUS key then enter new 4-digit User Code (System should confirm by displaying “Bouncing Balls” on display) |
| Change Duress |
Turn on Program Switch, press both POLICE BUTTONS + 99 (System should confirm by displaying “Bouncing Balls” on display) |