GE / ITI / UC Simon XT Codes
| Order and Functions of User Codes during programming | |
| Utility Code 1 | (Main Installer Code, programs everything) |
| Utility Code 2 | (Dealer Access Code, Programs all but communicator) |
| Master Code | |
| Access Code 1 | |
| Access Code 2 | |
| Access Code 3 | |
| Access Code 4 | |
| Access Code 5 | |
| Duress Code | |
|
|
|
| Keypad Examples |  |
|
*IMPORTANT* Notice the two different variations, on one the ‘Enter’ key says ‘OK’ on it and on the other it is an arrow pointing to the left. Also notice the up and down arrows are a little different. |
|
| Add Master |
1. Press the down arrow until screen says ‘System Programming’ 2. Press the ‘Enter’ button 3. Enter the existing master code, or if they do not know it, try the installer code, 4321 is the default installer code and 1234 is the default master code 4. The screen should now say ‘Access Codes’ if it still says ‘System Programming’ they either took too long or that was not the master code 5. Press the ‘Enter’ button 6. Press the down arrow until the screen says ‘Master’ 7. Press the ‘Enter’ button 8. Enter the desired Master Code 9. Press the ‘Enter’ button 10. Press the ‘Status’ button 4 times in a row to exit user programming
|
| Change Master |
1. Press the down arrow until screen says ‘System Programming’ 2. Press the ‘Enter’ button 3. Enter the existing master code, or if they do not know it, try the installer code, 4321 is the default installer code and 1234 is the default master code 4. The screen should now say ‘Access Codes’ if it still says ‘System Programming’ they either took too long or that was not the master code 5. Press the ‘Enter’ button 6. Press the down arrow until the screen says ‘Master’ 7. Press the ‘Enter’ button 8. Enter the desired Master Code 9. Press the ‘Enter’ button 10. Press the ‘Status’ button 4 times in a row to exit user programming
|
| Add Code |
1. Press the down arrow until screen says ‘System Programming’ 2. Press the ‘Enter’ button 3. Enter the existing master code, or if they do not know it, try the installer code, 4321 is the default installer code and 1234 is the default master code 4. The screen should now say ‘Access Codes’ if it still says ‘System Programming’ they either took too long or that was not the master code 5. Press the ‘Enter’ button 6. Press the down arrow until the screen says the code that you want to change 7. Press the ‘Enter’ button 8. Enter the desired Master Code 9. Press the ‘Enter’ button 10. Press the ‘Status’ button 4 times in a row to exit user programming
|
| Delete Code |
1. Press the down arrow until screen says ‘System Programming’ 2. Press the ‘Enter’ button 3. Enter the existing master code, or if they do not know it, try the installer code, 4321 is the default installer code and 1234 is the default master code 4. The screen should now say ‘Access Codes’ if it still says ‘System Programming’ they either took too long or that was not the master code 5. Press the ‘Enter’ button 6. Press the down arrow until the screen says the code that you want to change 7. Press the ‘Disarm’ button 8. Press the ‘Status’ button 4 times in a row to exit user programming
|