Zones |
up to 40 Wireless |
Batteries |
Keypad: 6.0VDC 1.2AH Lead-Acid |
|
Door: CR123 |
|
Motion: AA |
|
Carbon: AAA |
|
Tilt: CR2023 |
|
Smoke: CR2025 |
|
Flood: CR2025 |
|
Freeze: CR2025 |
|
Image: Lithium AA |
|
Wallfob: CR2023 x2 |
|
Transformer: 9v AC |
|
Glassbreak: CR123 x2 |
Transformer |
9VAC, 60Hz, 25VA Transformer
|
Partitions |
1 |
Downloadable |
Yes |
Panic Buttons |
|
Status |
Status Button
If Blinking Alarm exists, clear by press status then disarm
|
Arm AWAY |
Press the Doors+Windows button, then Press Motions Button
(May need to enter code after Doors+Windows Button.)
|
Arm Stay |
Press Doors+Windows Button |
Disarm |
Press Disarm then enter code. |
Exit Menu |
Press Status to exit any menu. |
Comm Test |
Scroll with arrow keys to System Test and press Ok
Then Scroll to Comm Test and press Ok
Status to Exit
|
Silence Alarm |
Press Disarm |
Door Chimes |
1. Scroll with the arrow keys until it shows Chime and press Enter
2. Use Arrow keys to toggle chime on and off and press Enter when choice is correct.
3. Press Status to Exit.
|
Bypass |
Only when System is Disamed
1. Arm the system
2. Press Bypass with the problem zone chimes
|
|
Only when System is Armed
1. Press Bypass and Enter Master Code
2. Scroll with Arrow Keys until you reach the sensor you want to bypass
3. Press Enter to Un-Bypass Sensor and Bypass should disappear in second line
4. Press Status to Exit or scroll to next sensor to Un-bypass
|
Un-Bypass |
This is to unbypass when armed otherwise they auto unbypass when disarmed.
1. Press Bypass and Enter Master Code
2. Scroll with Arrow Keys until you reach the sensor you want to UN-bypass
3. Press Enter to Bypass Sensor and Bypass with be displayed on second line
4. Press Status to Exit or scroll to next sensor to bypass
|
Reset Smoke |
Press Disarm |
Test Sensors |
1. Scroll to System Tests and Press Enter
2. Enter Master Code and press Enter
3. Should display Sensor Test. Press Enter.
4. Display will show sensors to test. Trip the devices
5. Press Status, if all sensors tested should say Sensor Test OK
If not all sensors were tested it will say Sensor Test Failed
6. Press Status again to Exit.
|
Set Time |
1. Scroll to Set Clock and press OK
2. Enter Code and Press OK and should flash hours
3. Scroll to set the hours and press OK to accept, should flash minutes
4. Scroll to set minutes and press ok to accept, should flash AM/PM
5. Scroll to AM or PM and press Ok to accept. Should show Current time
6. Press Status Twice to Exit.
|
Set Date |
1. Scroll to Set Date and press OK
2. Enter Code and Press OK Should Show the Date
3. Press OK and should flash the year.
4. Scroll to set year and press OK, should flash the month
5. Scroll to set Month and press OK, Should flash day
6. Scroll to set Day and press OK, Should show Date
7. Press Status twice to exit.
|
Change Contrast |
1. Scroll to Contrast and press OK
2. Use arrows to increase and decrease Contrast
3. When finished press status to save and exit.
|
Clear Weather alerts |
1. Press and hold the # sign for 10 seconds.
|