GE / ITI / UC Simon 2 Codes
| Order and Functions of User Codes during programming | |
| Utility Code 1 | (Main Installer Code, programs everything) |
| Utility Code 2 | (Dealer Access Code, Programs all but communicator) |
| Master Code | (Program locations 01, 02, 03, 36, 37, 41, 42 & User Codes) |
| Access Code 1 | |
| Access Code 2 | |
| Access Code 3 | |
| Access Code 4 | |
| Access Code 5 | |
| Duress Code | |
|
|
|
| Add Master |
1. Open cover and enter Master Code using Red Number keys 2. Keypad says “Select from Start Menu” press ADD button 3. Keypad says “Select from Main Menu” press ACCESS CODE 4. Keypad says “Utility Access Code 1? press again or DONE” press ACCESS CODE 5. Keypad says “Utility Access Code 2? press again or DONE” press ACCESS CODE 4. Keypad says “Master Code? press again or DONE” 5. Press DONE and enter new Master Code 7. Keypad will speak new User Code, Close keypad cover to exit |
| Add Code |
1. Open cover and enter Master Code using Red Number keys 2. Keypad says “Select from Start Menu” press ADD button 3. Keypad says “Select from Main Menu” press ACCESS CODE 4. Keypad says “Master Code? press again for Next or DONE” 5. Press DONE to change Master Code or ACCESS CODE again for next Access Code 6. When desired user is found press DONE and enter new 4-digit code 7. Keypad will speak new User Code, Close keypad cover to exit |
| Delete Code |
1. Open cover and enter Master Code using Red Number keys 2. Keypad says “Select from Start Menu” press DELETE 3. Keypad says “Select from Main Menu” press ACCESS CODE 4. Keypad says “ACCESS CODE 1? press again for Next or DONE” 5. Press DONE to delete User Code 1 or ACCESS CODE again for next User 6. when desired user is found press DONE 7. Keypad will say “User Code Deleted”, close keypad cover to exit |