1. Home
  2. GE ITI
  3. GE RF
  4. GE RF
 

GE / ITI / UC Commander 817 Program

Format ITI only
Enter Program Back bottom screw under keypad out until lights begin flashing
Exit Program Turn bottom screw under keypad in until flashing stops
Defaul Panel POLICE + POLICE + MEDICAL + MEDICAL (“Memory Goodbye“)
House Code FIRE + FIRE + (001 to 254)
Duress Code POLICE + POLICE + (00 to 99) (Hostage = 1st 2 digits of code + 99)
Siren Timeout MEDICAL + MEDICAL + (2 to 9)
Entry Delay POLICE + POLICE + STATUS + (8 to 88 seconds)
Exit Delay POLICE + POLICE + BYPASS + (8 to 88 seconds)
Account FIRE + FIRE + STATUS + [xx-xxx] (0 as 1st digit if 4-digit account used)
(A to F can only be added by CS-4000)
Receiver Number FIRE + FIRE + BYPASS + <up to 14 digits> (For pause press FIRE FIRE)
Add Sensor STATUS + Sensor (2 digits) (“Sensor xx Okay“)
Erase Sensor BYPASS + Sensor (2 digits) (“Sensor xx Goodbye“)
Hear All Sensors Press STATUS
Program Sensor to zone number below to define what zone type is (1 sensor per zone)
Commander 8 Zones (can’t be changed) Commander 17 Zones (can be changed if v2.6+)
Zone Type Zone Type
00 Fire 00 Auxiliary (Freeze Sensor)
01 Fire/Heat Sensor 01 Fire
02 Fire/Heat Sensor 02 Delay
03 Fire/Heat Sensor 03 Delay
04 Exit/Entry Delay Doors 04 Perimeter
05 Exit/Entry Delay Doors 05 Perimeter
06 Perimeter 06 Perimeter
07 Perimeter 07 Perimeter
08 Perimeter 08 Perimeter
09 Perimeter 09 Perimeter
10 Perimeter 10 Perimeter
11 Interior Instant Door 11 Perimeter
12 Interior Instant PIR/Sound 12 Perimeter
13 Interior Instant PIR/Sound 13 Interior Instant PIR/Sound
14 Audible Police Panic (Unsupervised) 14 Interior Instant PIR/Sound
15 Silent Police Panic (Unsupervised) 15 Interior Instant PIR/Sound
16 Audible Aux. Panic (Unsupervised) 16 Interior Instant PIR/Sound
80 Touchpad Fire Panic 80 Touchpad Fire Panic
81 Touchpad Police Panic 81 Touchpad Police Panic
82 Touchpad Auxiliary Panic 82 Touchpad Auxiliary Panic
83 Manual Phone Test (Level 8) 83 Manual Phone Test (Level 8)
84 Opening Report (Optional) 84 Opening Report (Optional)
85 Closing Report (Optional) 85 Closing Report (Optional)
86 Duress Alarm Report 86 Duress Alarm Report
87 Force Armed Auto 87 Force Armed Auto
90 AC Failure 90 AC Failure
91 Low Battery 91 Low Battery
92 CPU Tamper 92 CPU Tamper
93 Auto Phone Test 93 Auto Phone Test
94 Receiver Failure 94 Receiver Failure
94 Invalid Sensor Number* 94 Invalid Sensor Number*
95 CPU Back in Service (AC Restoral) 95 CPU Back in Service (AC Restoral)
96 Fail To Communicate 96 Fail To Communicate
*A sensor is not programmed into panel but has the same House Code
CS-4000 Commands
ACCT or
ACCOUNT 		<XX-XX> Account Number (0 as 1st digit if 4-digit account)
ACCESS <4-digits> Programs Master Code
ANS 1 Connects CS-4000 to Panel
BATTLIFE <1 to 30> Battery Life? in Hours
BYPASS or
BYP 		(00 to 16) Bypasses Sensors
DELETE or
DEL 		(00 to 16) Deletes Sensors
DURESS <00 to 99> Hostage/Duress Code (usually 99)
ENTRY <8 to 88> Entry Delay (seconds)
EXIT <8 to 88> Exit Delay (seconds)
GROUP <zone>
<zone type> 		Changes Zone type (Commander 17 2.6 only)

Freeze GROUP <zone> 01 L
Fire GROUP <zone> 02 D
Delay GROUP <zone> 04 L
Instant GROUP <zone> 05 L
Interior Inst Follower GROUP <zone> 06 L
Interior Follower GROUP <zone> 06 I
Silent Police Panic GROUP <zone> 12 A
Audible Medical Panic GROUP <zone> 01 B
HOUSE <1 to 255> Views House Code
INIT <00 to 16> Initializes Sensors
MACCESS <2 to 6>
<4 digits> 		Programs Secondary Codes
(Commander 8 only has 1 secondary Code)
PTFREQ <1 to 255> Auto phone test frequency
PHONE <7 to 4 digits> Primary Receiver (D = Pause)
PHONE2 <7 to 4 digits> Secondary Receiver (Commander 17 only)
PLEVEL <1 to 3> Changes Arming Level
PLEVEL 1 = Disarm
PLEVEL 2 = Arm Home
PLEVEL 3 = Arm Away
RECALL Tells panel to Disconnect and call back
REL Releases Panel from CS-4000
SIREN <1 to 9> Siren Timeout in Minutes
STIME <hh:mm> Supervisory Report Time
ZONES Lists all Zones including Panics & Supervisory