GE / ITI / UC Quick Bridge2 Program

Specs Up to 4 sensors or keyfobs total
Example: 3 sensors can be learned into Zone 1 and 1 sensor can be learned into 2
Learn Sensor
into Zone 1
1. Press and Hold Program button until Receiver double-clicks
2. Release the Program button
3. After 3 seconds receiver LED begins flashing
4. Trip sensor at arms length away from Receiver
5. After 3 seconds receiver will double-click from 1 to 4 times
(Number of double-clicks = number of sensors programmed to that zone)
Learn Sensor
into Zone 2
1. Press and Hold Program button until Receiver double-clicks
2. Continue to hold Program button until Receiver double-clicks again
3. Release the Program Button
4. After 3 seconds receiver LED begins flashing
5. Trip sensor at arms length away from receiver
6. After 3 seconds receiver will double-click from 1 to 4 times
(Number of double-clicks = number of sensors programmed to that zone)
Default Receiver
1. Press and Hold Program button until Receiver double-clicks
2. Continue to hold Program button until Receiver double-clicks again
3. Continue to hold Program button until Receiver double-clicks for the 3rd time
4. Release the Program button
Learning Keyfob Any pair of buttons can be learned multiple times into the same Zone or Zones 1 and 2
Example: ARM & DISARM can be learned into Zone 1 for Maintained Arming/Disarming
LIGHT & STAR can learn into Zone 1 & 2 to control X-10 PowerFlash for Garage Door or Lights
Button Mode (What button pairs can be learned in what zone to perform what function)

Buttons Learned Performs what function Which Zone can be used
LOCK & UNLOCK Maintained Arming and Disarming Zone 1 or Zone 2
LIGHT & STAR STAR to control Lights or open Garage Zone 1 or Zone 2
LIGHT & UNLOCK LIGHT does momentary activation
STAR does momentary activation
(Doesn’t matter which Zone this is learned into) 		Zone 1
Zone 2
LOCK & STAR LOCK does momentary activation
UNLOCK does momentary activation
(Doesn’t matter which Zone this is learned into) 		Zone 1
Zone 2