GE / ITI / UC FoneSafe Trouble

If trouble exists the STATUS light will begin flashing, press STATUS key to hear trouble
System can still be armed while in trouble, after pressing HOME or AWAY press Bypass
Sensor Test Press TEST + Master Code + 2 Press RESET or OFF + User Code to end
(System speak list of all sensors, opening sensor removes from list)
Battery Test Press TEST + Master Code + 4
(System does 5 minute battery test, if trouble exists STATUS light will flash)
Phone Test Press TEST + Master Code + 3 + open Zone, press RESET to end
(Apparently zone must be violated to send a phone test signal)
Siren Test Press TEST + Master Code + 7, siren sounds for 4 seconds, press RESET to end
Keypad Test Press TEST + Master Code + 5, keypad will repeat each key pressed, press RESET to end