GE / ITI / UC Concord Codes
Master Code | User 020 | |
Partition Masters | 010 is Part 1, 011 is Part 2 | |
Secondary Users | 00 to 59 | |
Duress Code | Can only be changed by Downloading or Service Tech | |
|
||
Quick Way for All Keypads | ||
|
||
Change System Master Code |
1. Press 9 + Master Code | |
2. Press 0320 + new 4-digit Code | ||
3. Press # to save | ||
4. Press * + 00 + # to exit | (If Code not accepted it may be a duplicate) | |
Change Partition Master Code |
1. Press 9 + Master Code | |
2. Enter 0310 (Partition 1) or 0311 (Partition 2) | ||
3. Enter new Partition Master Code | ||
4. Press # to save | ||
5. Press * + 00 + # to exit | (If Code not accepted it may be a duplicate) | |
Add User Code | 1. Press 9 + Master Code | |
2. Select User by pressing | ||
* + 030000 for User 00 | ||
to | ||
* + 030590 for User 59 | ||
3. Enter New 4-digit User Code + # | ||
4. Press * + 00 + # to exit | (If Code not accepted it may be a duplicate) | |
|
||
Detailed Way for Alpha Keypads Only | ||
|
||
Change System Master Code |
1. Press 9 + Master Code | (“SYSTEM MENU ” then “USER CODES”) |
2. Press B key until “USER CODES” | ||
3. Press # Key | (Display shows “REGULAR USER CODES”) | |
4. Press B key | (Display shows “PARTITION MASTER CODE”) | |
5. Press B key again | (Display shows “SYSTEM MASTER CODE”) | |
6. Press # | (Display shows “MASTER CODE – – – -“) | |
7. Enter New Master Code + # | (Display shows new Master Code) | |
8. Press * + 00 + # to exit | (If Code not accepted it may be a duplicate) | |
Add User Code | 1. Press 9 + Master Code | (Display shows “SYSTEM MENU”) |
2. Press B key until “USER CODES” | ||
3. Press # | (Display shows “REGULAR USER CODES”) | |
4. Press # again ( | Display shows “USER 00 – – – – -“) | |
5. Use B to scroll Users 01 to 59 until User to program found |
||
6. Enter New User Code + # | (Display shows “USER + New Code”) | |
7. Press * + 00 + # to exit | (If Code not accepted it may be a duplicate) | |
Delete Code | 1. Press 9 + Master Code | (Display shows “SYSTEM MENU”) |
2. Press B key until “USER CODES” | ||
3. Press # | (Display shows “REGULAR USER CODES”) | |
4. Press # again | (Display shows “USER 00 – Code”) | |
5. Use B to scroll Users 00 to 59 until user to delete is found | ||
6. Enter Master Code + # ( | Display shows “USER – * * * *”) | |
7. Press * + 00 + # to exit |