GE / ITI / UC Concord Express Trouble
| Keypad beeps 5 times on troubles, press * to view | |
| Check Status |
Press * (STATUS) to view Press * key once for short status message, twice = Full Status (Full Status shows AC Power and Battery Status) |
| Bus Failure |
A Keypad or other Module has trouble communicating with Panel This will happen if tech learned programming keypad into system, go to the bottom of programming page for instructions how to delete from system |
| Memory Failure | System has an internal problem, needs Service |
| Phone Failure | System cannot communicate with Monitoring Station |
| Receiver Failure | Internal Wireless Receiver has failed |
| Sensor Tamper | Cover may be off of a Sensor |
| Sensor Trouble | Sensor may be bad or have a dead battery |
| Enable Download |
1. Press 9 + Master Code to enter programming menu 2. Press 2 + 0 3. Press 2 + # to enable downloading 4, Press * + 4 + # |