1. Home
  2. GE ITI
  3. GE Advent
  4. GE Advent
 

GE / ITI / UC Advent Basics

Zones
Home Navigator = 130 Hardwired or Wireless
Advent Commercial = 250 Hardwired or Wireless
Transformer 24 volt AC
Batteries
Main Panel 12 volt 8.5 Ah rechargeable ITI part #60-781 (really really big battery)
Door/Window 3.6 volt Lithium (LS14250)
Glassbreaks 3.6 volt Lithium or 1 3.6 Lithium (LS14250)
Keyfob 12 Volt Alkaline
Motion 1 or 2 3.6 volt Lithium (LS14250)
Smoke 2 9-volt Alkaline
Home
Automation 		Panja Landmark PLB-CF10 Interface www.panja.com
Partitions 4 (Home Navigator)
8 (Commercial panel)
Downloadable Yes
Enable
Downloading 		Press 8 + 2 + ** to exit
Panic Buttons Police, Medical and Fire Panics, hold both buttons to activate
Away Arm 1 + 1 + 3 (may need to enter Access Code)
Stay Arm 1 + 1 + 3 (may need to enter Access Code)
Instant Arm 1 + 2 + 9 for Stay Instant Arming
1 + 3 + 9 for Away Instant Arming
Silent Arm 2 + 1 for Silent Disarm (Press 9 after for Instant Arming)
2 + 2 for Silent Stay Arming
2 + 3 for Silent Away Arming
Disarm 1 + 1 + User Code
Silence Alarm Enter Access Code, press 1 + 0 to view last alarm
Reset Smoke 8 + 9 + Access Codes
Check Status 1 + 9 (System shows status, open zones)
Bypass
Force Bypass Open zone then arm to Stay or Away
Keypad will beep, voice says “Protest” then says open zone
Press # to Bypass or * to abort
Set Time/Date Call Tech Support, may have to be walked through programming
Door Chimes Press 7 + 1 + ** to exit (System says “CHIME IS ON or OFF”)
Alarm History 1 + 0 to list last alarm
Press ** to exit
Event Buffer 7 + 5
Keypad lists all events from last to first
Press * to abort
Press ** to exit
Phone Test 0 + 1 (System says “PHONE TEST OK or FAIL”)
Battery Test 8 + 9
Keypad Volume 8 + 4
Press 0 (lowest) to 8 (Highest volume)
# to accept ** to exit
Keypad
Brightness 		Press 1 for 2 seconds to step through brightness levels
Lights ON 4 + 0 + # + 1
Lights OFF 4 + 0 + # + 2
Phone Access Press # + * on any phone (System says “HELLO, MAIN MENU”)
Local Phone Commands:

Panic # + * + 7 7 7 7 7
Disarm # + * + 1 + 1 + Access Code
Home Arm # + * + 1 + 2 + Access Code
Away Arm # + * + 1 + 3 + Access Code
Reset Smokes # + * + 8 + 9 + Access Code
Check Status # + * + 1 + 9
Alarm History # + * + 1 + 0
Event History # + * + 7 + 5
Remote Access Call number panel is on, let right once
Wait 10 seconds then call again, system should ask for Access Code
OR
Let phone right until answering machine answers
Press * + * + # + #, system should ask for Access Code
Pager Signals Pagers sends Event Code + User or Sensor Number + Last 4-Digits of Account
Example: If Account 1234 is Disarmed by Master Code pager sends 111 678 1234
Event Codes 000 = System Event Code (Test?)
009 = Zone Restore
001 to 024 = Sensor 01 to 24 Alarm or Trouble
111 = System has been Disarmed
118 = System Trouble has Restored
119 = Alarm Cancelled
222 = System was Armed to Level 2 (Stay)
333 = System was Armed to Level 3 (Away)
555 = System sent Phone Test
888 = System has a Trouble
999 = System is in Alarm
Sensor/Users 601 to 659 = Regular User Codes 01 to 59
661 = Partition 1 Master Code
662 = Partition 2 Master Code
670 = Duress Code Partition 1
671 = Duress Code Partition 2
678 = System Master Code
679 = Installer Code
680 = Dealer Code
681 = AVM 2-Way Module Used (?)
697 = System was Quick Armed
698 = Keyswitch Arming Number
699 = System Armed itself after Service or Power-up
128 = Keyfob Number
129 to 204 = Differentiating Fobs (No idea what this is)
205 to 213 = Keyfobs as Touchpads