1. Home
  2. Firelite
  3. Firelite MS-5024
  4. Firelite MS-5024
 

Firelite MS5024 / US52014 UDE Basics

This is a Fire system, powering down is usually illegal!
Zones 5 Fire Zones
Silence Alarm Press SILENCE
Reset System Press RESET


 (Display will show rES for 6 seconds)

(Displays active alarm or 1st previous event)

(Displays newest Alarms in memory)

(Displays previous Alarms in memory)

Zone Disable (If zone is in trouble only)
1. Press MODE
2. Press 3472 + ENTER/STORE
3. Enter Zone to disable(1 to 5)
4. Press ENTER/STORE
(Display goes blank)
(Display shows “d”)
(Zone will appear at far right of display)
(Trouble LED will blink, d__ 1 to 4 displays)
Zone Re-Enable (If zone was disabled with a trouble)
1. Press MODE
2. Press 3622 + ENTER/STORE
3. Enter Zone to re-enable (1 to 5)
4. Press ENTER/STORE
(Display goes blank)
(Display shows flashing “E”)
(Zone will appear at far right of display)
(Trouble LED will turn OFF)
Fire Drill 1. Press MODE
2. Press 3745 + ENTER/STORE
3. Press RESET to exit 		(Display goes blank)
(Display shows “dril”)
Lamp Test MODE + 5267 + ENTER/STORE (turns on all System LED’s for 5 seconds)
Walk Test 1. Press MODE
2. Press 9255 + ENTER/STORE
3. Press 6676 + ENTER/STORE to exit 		(Display goes blank)
(Trouble light begins blinking)
History Mode 1. Press MODE
2. Press 4478 + ENTER/STORE


3. SILENCE twice to erase History
4. Press 6676 + ENTER/STORE to exit 		(Display goes blank)
Displays newest Alarms in History
Displays previous Alarms in History
Displays
d__1 = Zone 1 Disabled     F__4 = Trouble Zone 4
d__2 = Zone 2 Disabled F__5 = Trouble Zone 5
d__3 = Zone 3 Disabled F__A = Annunciator Fault
d__4 = Zone 4 Disabled F__E = Earth Fault
d__5 = Zone 5 Disabled Lo_b = Low Battery
E__1 = Zone 1 Enabled no_b = No Battery
E__2 = Zone 2 Enabled PH_1 = Primary C. S. Number Comm Fault
E__3 = Zone 3 Enabled PH_2 = Secondary C. S. Number Com Fault
E__4 = Zone 4 Enabled bEL1 = Bell 1 Fault or Disabled
E__5 = Zone 5 Enabled bEL2 = Bell 2 Fault or Disabled
A__1 = Alarm Zone 1 no_1 = Primary Phone Line Fault
A__2 = Alarm Zone 2 no_2 = Secondary Phone Line Fault
A__3 = Alarm Zone 3 SUP1 = Supervisory Alarm Zone 1
A__4 = Alarm Zone 4 SUP2 = Supervisory Alarm Zone 2
A__5 = Alarm Zone 5 SUP3 = Supervisory Alarm Zone 3
F__1 = Trouble Zone 1 SUP4 = Supervisory Alarm Zone 4
F__2 = Trouble Zone 2 SUP5 = Supervisory Alarm Zone 5
F__3 = Trouble Zone 3 _AC_ = AC Power Loss
rES_ = System Reset